Development of the cooling effect skincare product using LPG as propellant

액화 석유가스를 이용한 냉각 화장품 개발

  • Kim Hwayong (School of Chemical Engineering and Institute of Chemical Processes, Seoul National University) ;
  • Park Chanik (Department of Cosmetic Engineering, Daegu Haany University) ;
  • Bae Won (School of Chemical Engineering and Institute of Chemical Processes, Seoul National University)
  • 김화용 (서울대학교 응용화학부/화학공정신기술연구소) ;
  • 박찬익 (대구한의대학교 화장품공학과) ;
  • 배원 (서울대학교 응용화학부/화학공정신기술연구소)
  • Published : 2003.12.01

Abstract

Freon gas has been replaced with LPG in the cosmetic industry because of its bad effects on environment. In this paper, skincare product with a cooling effect was developed using LPG as propellant. A cooling effect is obtained by the ice which is formed through spraying. Ice formation is affected by the composition of LPG and most of all, the high content of propane gas in the LPG results in the irregular surface of ice formed because of its high vapor pressure. Also the ratio of LPG to skincare solution affects the formation of ice.

에어졸 제품에 주로 사용되어왔던 프레온 가스는 오존층 파괴 등의 나쁜 영향으로 인해 액화석유가스(LPG)로 대체되었다. 따라서 본 연구에서는 프레온 가스가 아닌 액화석유가스를 이용하여 피부에 냉감 효과를 줄 수 있는 화장품을 개발하였다. 냉감 효과는 분사할 때 형성되는 얼음의 지속력에 의해 결정되었으며 얼음의 성상 관찰을 통해 최적의 원액 처방과 액화석유가스의 혼합비율을 선정하였다. 원액의 처방에서는 향을 가용화시킨 스킨타입으로 제조했으며 투명 내압용기를 이용하여 원액과 액화석유가스의 유화안정성을 평가하였다. 액화석유가스의 성분비(프로판:이소부탄:노말부탄)는 원액을 분사할 때 생성되는 얼음의 성상에 가장 큰 영향을 미쳤으며 프로판 가스의 함량이 높을 경우 분사압력이 높아 생성되는 얼음이 분사압력에 의해 부서지는 현상이 생겨 일정한 부피의 얼음을 얻기가 어렵게 된다. 실험결과 프로판 가스의 함량이 $3\%$미만이고 이소 부탄 가스의 함량이 $20\%$이상이며 노말 부탄 가스의 함량 $60\%$이상일 경우 최적의 얼음이 생성되었다. 또한 원액과 액화석유가스의 혼합 비율도 얼음 생성에 큰 영향을 미쳤으며 액화 석유가스의 양을 원액의 양을 기준으로 최소한 $50\%$ 이상 사용할 경우 얼음이 생성되었다.

Keywords