A Direct Cost Analysis Model in Manufacturing System

생산 시스템에서 직접 원가 분석 모델

  • Han, Jooyun (Department of Industrial Systems Engineering, Yonsei University) ;
  • Jeong, Bongju (Department of Industrial Systems Engineering, Yonsei University) ;
  • Yoo, Il-Geon (Department of Industrial Engineering, Hongik University)
  • 한주윤 (연세대학교 산업시스템공학과) ;
  • 정봉주 (연세대학교 산업시스템공학과) ;
  • 유일근 (홍익대학교 산업공학과)
  • Published : 2003.12.31

Abstract

Although manufacturing cost is a major part of profit in a company, it is difficult to be calculated by an analytic method. Besides, the manufacturing cost gained by simple financial structure dose not have an important meaning in market place. Therefore, an analytic method of computing the manufacturing cost is very necessary in manufacturing system. In this study, we suggested the direct cost analysis model which are able to measure accurate cost analysis of product in manufacturing system. The direct cost analysis model is made up of directly used expenditure for unit product. Also, system performances are put in the manufacturing cost analysis model so that it could be possible to analyze the change of manufacturing cost as system performances change. At the end of this paper, it verifies its relevancy and practicality of the suggested direct cost analysis model through the case study, using real data for direct labor cost.

Keywords

References

  1. Aderoba, A. (1997), A generalized cost-estimation model for job shops. International Journal of Production Economics, 53(3), 257-263.
  2. Bloch, C. and Ranganathan, R. (1992). Process based cost modeling. IEEE Transactions on Components, Hybrids and Manufacturing Technology, 15(3), 288-294. https://doi.org/10.1109/33.148492
  3. Boons, A. N. A. M. (1998). Product costing for complex manufacturing systems. International Journal of Production Economics, 55(3), 24 1-255. https://doi.org/10.1016/S0925-5273(98)00064-4
  4. Chang, Y. S., Tjiang, C. K. G. and Besant, C. B. (1997). Cost analysis for semiconductor wafer fabrication. Proceedings of the 2nd Annual International Conference on Industrial Engineering. 1113-1118.
  5. Dance, D. L., Floria, T. D. and Jimenez, D. W. (1996). Modeling the cost of ownership of assembly and inspection. IEEE Transactions on Components Packaging and Manufacturing Technology Part C. 19(1), 57-60. https://doi.org/10.1109/3476.484205
  6. Hopp, W. J. and Spearman, M. L. (1996). Factory Physics, 198, IRWIN, USA.
  7. Mohamed, A. and Celik, T. (2002). Knowledge based-system for alternative design. cost estimating and scheduling. Knowledge Based Systems, 15(3), 177-188.
  8. Ong, N. S., Lim, L. E. N. and Yeo, K. T., (1993). Manufacturing cost modeling for electrical interconnections. International. Journal of Operations and Production Management, 13(2), 63-75. https://doi.org/10.1108/01443579310025312
  9. Ong, N. S. (1995). Manufacturing cost estimation for PCB assembly : An activity-based approach. International Journal of Production Economics, 38(2-3), 159-172.
  10. Scheffler, M., Ammann, D., Thiel, A. Habiger, C. and Troster, G. (1998). Modeling and optimizing the cost of electronic system. IEEE Design and Test of Computers, 15(3), 20-26. https://doi.org/10.1109/54.706029
  11. Shehab, E. M. and Abdalla, H. S. (2001). Manufacturing cost modeling for concurrent product development. Robotics and Computer Integrated Manutacturing, 17(4), 341-353. https://doi.org/10.1016/S0736-5845(01)00009-6
  12. Shehab, E. M. and Abdalla, H. S. (2002). An intelligent knowledge-based system for product cost modeling. International Journal of Advanced Manufacturing Technology, 19(1), 49-65. https://doi.org/10.1007/PL00003967
  13. Tomberg, K., Jamsen, M. and Paranko, J. (2002). Activity-based costing and process modeling for cost-conscious product design: A case study in a manufacturing company. International Journal of Production Economics, 79(1), 75-82. https://doi.org/10.1016/S0925-5273(00)00179-1
  14. Yoo, I-G. (1997), Cost Accounting and Analysis, Sigma press.