한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권1호
  • /
  • Pages.50-62
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

절삭유(Metalworking Fluids)의 발암성에 대한 고찰

Critical Review on Carcinogenicity of Metalworking Fluids

  • 박동욱 (한국방송통신대학교 환경보건학과) ;
  • 윤충식 (대구카톨릭대학교 산업보건학과) ;
  • 이송권 (경산대학교 보건과학과)
  • 발행 : 2003.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Exposure to metalworking fluids (MWFs) has significantly been associated with cancer developed in multi-organs, respiratory diseases and skin diseases. Several carcinogens to humans or animals are contained in MWFs. They have been reported to be mineral oils, polynuclear aromatic hydrocarbons (PAHs), formaldehyde and N-nitrosodiethanolamine (NDELA). The great hazards of MWF have forced the advanced country including United States to regulate carcinogens contained in MWF. In 2001, American Conference of Governmental Industrial Hygienists (ACGIHs) regarded MWF mist as suspected carcinogen to human (A2) and added it to “Notice of Intended Change (NIC)” list of 2001. In spite of the fact that much MWF has widely been used in many industries using machines, Korea has no legal actions for management of MWF. What is worse, even toxicity such as Carcinogenicity has not been reported. KS (Korean Standards) lists 7 advices of MWF but it does net state the hazards to health. It is very hard to control or minimize worker's exposure to MWF containing many carcinogens. Prier to the introduction of MWF to workplace, it is the most effective measure to regulate carcinogens below a certain level. Regulation on the content of PAH seems to be necessary because less amount of PAH in mineral oils improves the quality of MWF. Also, addition of nitrosating groups to MWF should be prohibited to minimize worker's exposure to NDELA. Employers and manufacturers should indicate the Carcinogenicity of all carcinogens in MWFs in Material Safety Data Sheets (MSDS) in order fer workers to recognize Carcinogenicity. Legal actions have to be taken to protect workers from health hazards due to exposure to MWF by further investigation on MWF.

키워드

참고문헌

  1. 한국 기기유화시험 연구원, '절삭유제와 연삭유제,' pp. 240-249, 1996
  2. 山中 彦, '절삭가공유의 구조와 작용. 기계와 윤활,' pp. 86-93, 1993
  3. Occupational Safety and Health Administration (OSHA), 'Metalworking/Machining Fluids,' URL: http://www.osha.gov/oshinfo/priorities/metal.html. 2001
  4. NIOSH, 'Criteria for a Recommended Standard Occupational Exposures to Metalworking Fluids,' US. Dep. of Health and Human Services, CDC. NIOSH. February, 1998
  5. Bardin, JA., Eisen, EA., Tolbert, PE., Hallock, MF., Hammond, SK., Woskie, SR., 'Mortality Studies of Machining Fluid Exposure in the Automobile Industry. V: A Case-control Study of Pancreatic Cancer,' Am J Ind Med, Vol. 32(3), pp. 240-247, 1997 https://doi.org/10.1002/(SICI)1097-0274(199709)32:3<240::AID-AJIM9>3.0.CO;2-0
  6. Eisen, EA., Tolbert, PE., Monson, RR., Smith, TJ., 'Mortality Studies of Machining Fluid Exposure in the Automobile IndustryⅠ: A Standardized Mortality Ratio Analysis,' Am J Ind Med, Vol. 22, pp. 809-824, 1992 https://doi.org/10.1002/ajim.4700220604
  7. Eisen, EA., Tolbert, PE., Hallock, MF., Hammond, SK., Monson, RR., Smith, TJ, Woskie, SR., 'Mortality Studies of Machining Fluid Exposure in the Automobile Industry Ⅲ: A Case-control Study of Larynx Cancer,' Am J Ind Med, Vol. 26, pp. 185-202, 1994 https://doi.org/10.1002/ajim.4700260205
  8. Calvert, GM., Ward, E., Schnorr, TM., Fine, LJ., 'Cancer Risks among Workers Exposed to Metalworking Fluids: a Systematic Review,' Am J Ind Med, pp.33, pp. 282-292, 1998 https://doi.org/10.1002/(SICI)1097-0274(199803)33:3<282::AID-AJIM10>3.0.CO;2-W
  9. Jarvholm, B., Easton, D., 'Models for Skin Tumor Risks in Workers Exposed to Mineral Oils,' Br J Cancer, Vol. 62, pp. 1039-1041, 1990 https://doi.org/10.1038/bjc.1990.435
  10. Mallin, K., Berkeley, L., Young, Q., 'A Proportional Mortality Ratio Study of Workers in a Construction Equipment and Diesel Enginen Manufacturing Plant,' Am J Ind Med, Vol. 10, pp. 127-141, 1986 https://doi.org/10.1002/ajim.4700100204
  11. Park, R., Krebs, J., Mirer, F., 'Mortality at an Automobile Stamping and Assembly Complex,' Am J Ind Med. Vol. 26, pp. 449-463, 1994 https://doi.org/10.1002/ajim.4700260403
  12. Park, RM., Wegman, DH., Silverstein, MA., Maizlish, NA, Mirer, FE, 'Causes of Death Among Workers in a Bearing Manufacturing Plant,' Am J Ind Med, Vol. 13, pp. 569-580, 1988 https://doi.org/10.1002/ajim.4700130505
  13. Rotimi, C., Austin, H., Delzell, E., Day, C., Macaluso, M., Honda, Y., 'Retrospective Follow-up Study of Foundry and Engine Plant Workers,' Am J Ind Med, Vol. 24, pp. 485-498, 1993 https://doi.org/10.1002/ajim.4700240412
  14. Silverstein, M., Park, R., Marmor, M., Maizlish, N., Mirer, F., 'Mortality Among Bearing Plant Workers Exposed to Metalworking Fluids and Abrasives,' J Occup Med, Vol.30(9), pp. 706-714, 1988
  15. Tolbert, PE., Eisen, EA., Polthier, IJ., Monson, RR., Hallock, MF., Smith, TJ., 'Mortality studies of Machining-fluid Exposure in the Automobile Industry. II. Risks Associated with Specific Fluid Types,' Scand J Work Environ Health, Vol. 18(6), pp. 351-360, 1992 https://doi.org/10.5271/sjweh.1562
  16. Sheehan, MJ., 'Summary: Final Report of the OSHA Metalworking Fluids Standards Advisory Committee. Summary of the Recommendations of the OSHA Metalworking Fluids,' Standards Advisory Committee, URL:http://www.osha-slc.gov/1999
  17. ACGIH, 'Threshold Limit Value(TLVs) for Chemical Substance and Physical Agents and Biological Exposure Indices(BEls),' ACGIH Cincinnati Ohio 2001
  18. 백남원, 박동욱, 윤충식, 김승원, 김신범, 김귀숙, '우리 나라에서 사용하는 광물유(금속가공유)의 유해특성과 관리대책에 관한 연구-수용성 금속가공유의 유해특성과 관리대책,' 한국산업위생학회지, 제8권, 제1호, pp. 67-75, 1998
  19. 백남원, 박동욱, 윤충식, 조숙자, 김신범, 임호섭, '우리 나라에서 사용하는 광물유(금속가공유)의 유해특성과 관리대책에 관한 연구-공기중 MWF 미스트의 측정방법과 관리대책,' 한국산업위생학회지, 제7권, 제2호, pp. 171-180, 1997
  20. 박동욱, 김신범, 신철임, '작업환경 중 MWF 미스트와 증기에 대한 측정방법의 개발-PVC 필터에 채취된 비 수용성 MWF 손실에 대한 보정,' 한국산업위생학회지, 제99권, 제2호, pp. 186-195, 1998
  21. Schroeder, JC., Tolbert, PE., Eisen, EA., Monson, RR., Hallock, MF, Smith, TJ., et al., 'Mortality Studies of Machining Fluid Exposure in the Automobile Industry, Ⅳ: a Case Study of Lung Cancer,' Am J Ind Med., Vol. 31(5), pp. 525-533, 1997 https://doi.org/10.1002/(SICI)1097-0274(199705)31:5<525::AID-AJIM5>3.0.CO;2-S
  22. International Agency Research Center(IARC), 'IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemical to Humans, Polynuclear Aromatic Compounds,' Vol. 32, 1983
  23. International Agency Research Center(IARC), 'Mineral Oils. In: IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemical to Humans, Part 2. Carbon Blacks, Mineral Oils(lubricant Base Oils and Derived Products) and Some Nitroarenes,' Vol. 33, pp. 87-168, 1984
  24. National Toxicology Program(NTP), 'Ninth Report on Carcinogens, Tars and Mineral Oils,' US Department of Health and Human Services, URL : http://ehis.niehs.nih.gov/roc/tco9.html, 2001
  25. Occupational Safety and Health Administration(OSHA), Federal Register Hazard Communication. Federal Register #: 59, pp. 6126-6184 Standard Number: 1910.1200;1915.1200;1917.28;1918.90;1926.59, 1994
  26. Environmental Protection Agency(EPA), 'United States Code. Title 15 Commerce and Trade, Chapter 53 Toxic Substances Control. Subchapter Ⅰ-Control of Toxic Substances,' pp. 2601-2692, 1976
  27. National Toxicology Program(NTP), 'Ninth Report on Carcinogens, Chlorinated paraffins(C12, 60% Chlorine),' US Department of Health and Human Services, URL : http://ehis.niehs.nih.gov/roc/toc9.html
  28. 한국산업규격(KS), '절삭유제(cutting fluid) M 2173-1985,' 공업진흥청 고시 제 95-544호, pp. 1-3, 1985
  29. Rossmoore, HW., 'Antimicrobial Agents for Water-based Metalworking,' J Occupa Med., Vol. 23(4), pp. 247-254, 1981
  30. Mattsby-Baltzer, I., Sandin, M., Ahlstrom, B., Allenmark, S., Edebo, M., Falsen, E., et al., 'Microbial Growth and Accumulation in Industrial Metal-working Fluids,' Appl Environ Microbiol, Vol. 55, pp. 2681-2689, 1989
  31. Hill, E.C., 'Microbial Aspects of Health Hazards from Water Based Metal Working Fluids,' Tribology Intl., Vol. 16(3), pp. 136-140, 1983 https://doi.org/10.1016/0301-679X(83)90056-7
  32. National Toxicology Program(NTP) 'Ninth Report on Formaldehyde,' US Department of Health and Human Services, URL : http://ehis.niehs.nih.gov/roc/toc9.html., 2001
  33. Cohen, H., 'Study of Formaldehyde Exposures from Metalworking Fluid Operations using Hexahydro-1,3,5-tris (2-hydroxyethyl)-s-triazine. In: Symposium Proceeding: the industrial Metalworking Environment; Assessment and Control. Dearborn MI November 13-16 Detroit MI,' Automobile Manufacturers Association, pp. 178-183, 1995
  34. Thorne, PS., Dekoster, JA., Subramanian, P., 'Bioaerosols and Airborne Endotoxins in a Machinig plant. In: Symposium Proceeding: the Industrial Metalworking Environment; Assessment and Control. Dearborn MI November 13-16 Detroit MI,' Automobile Manufacturers Association, pp. 244-247, 1995
  35. Jarvholm, B., Zingmark, PA., Osterdahl, BG., 'SHORT COMMUNICATION-High Concentration of N-Nitrosoldiethanolamine in a Diluted Commercial Cutting Fluid,' Am J Ind Med., Vol. 33, pp. 282-292, 1991 https://doi.org/10.1002/(SICI)1097-0274(199803)33:3<282::AID-AJIM10>3.0.CO;2-W
  36. International Agency Research Center(IARC), 'Mineral Oils: Untreated and Mildly-treated Oils(Group 1), Highly-refined Oils(Group 3) In: IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemical to Humans, Overall Evaluation of Carcinogenicity: An Updating of IARC Monographs,; Vol. 33, Supp. 7, pp. 252-259, 1987
  37. Jarvholm, B., Lavenius, B., Sallsten, G., 'Cancer Morbidity in Workers Exposed to Cutting Fluids Containing Nitrites and Amines,' Br J Ind Med, Vol. 43, pp. 563-565, 1986
  38. Lijinsky, W., 'Induction of Liver Tumors in Rats by Nitrosodiethanolamine at Low Doses,' Carcinogenesis, Vol. 6, No. 12, pp. 1679-1681, 1985 https://doi.org/10.1093/carcin/6.12.1679
  39. Linjinsky, WJ., 'Report on the Toxicology of Metalworking Fluids,' URL http://ntserver.ccohs.ca/html/liss.htm.
  40. Environmental Protection Agency(EPA), 'United States Code. Prohibition of Nitrites in Metalworking Fluids: Final Rule,' Federal Register 2762, Part 747, 1984
  41. Occupational Safety and Health Administration, 'Code of Federal Regulations Title 40 2001,' 23, Parts 700-789, pp. 499-505, Revised as of July 1
  42. Fan, TY., Morrioson, J., Rounbelhler, DP., Ross, R., Fine, DH., Miles, W., et. al., 'N-nitrosodiethanolamine in Synthetic Cutting Fluids: A part-per-hundred Impurity,' Science, Vol. 196(4285), pp. 70-71, 1977 https://doi.org/10.1126/science.841341
  43. Ducos, P. Gaudin, R. FrancinV,, JM., 'Determination N-nitrosodiethanolamine in Urine by Gas Chromatography Thermal Energy Analysis: Application in Workers Exposed to Aqueous Metalworking Fluids,' Int Arch Occup Environ Health, Vol. 72, pp. 215-222, 1999 https://doi.org/10.1007/s004200050364