참고문헌

1. Welding Journal v.79 no.6 Assessing hydrogen-assisted cracking fracture modes in high-strength steel weldments S. A. Gedeon;T. W. Eager
2. Welding Journal v.66 no.10 Compositional parameters for HAZ cracking and hardening in C-Mn steels P. H. M. Hart;P. L. Harrison
3. Journal of Japan Welding Soc. v.48 no.12 Studies on delayed cracking in steel weldments N. Yurioka;T. Yatake;R. Kutaoaka;S. Ohita
4. IIW-Doc. Ⅸ-1828-96 Comparison of methods to determine the preheat temperature for high strength weld metal O. Omig;H. Schutz;P. Krug
5. China Welding v.2 no.2 Prediction and prevention of cold cracking in pipe-line steel welding Zhang Wenyue
6. Welding Journal v.77 no.2 New flux cored wires control difusible hydrogen levels M. S. Sierdzinski;S. E. Ferree
7. Welding International v.9 no.1 Development of technology for producing low-hydrogen electrode A. E. Marchenko(et al.) https://doi.org/10.1080/09507119509548753
8. Welding Journal v.79 no.10 Hydrogen control in steel weld metal by means of fluoride addition in welding flux M. Matsushita;S. Liu
9. welding Journal v.73 no.1 Two paths, one goal: A consumable to weld HSLA-100 A. Cullison
10. Int. Met. Review v.31 no.1 Microstructural development in mild and low-alloy steel weld metal O. Grong;K. Matlock https://doi.org/10.1179/095066086790324186
11. Journal of KWS v.18 no.5 Microstructural characteristics of steel weld metal H. J. Kim;B. Y. Kang
12. Metal Construction v.15 no.8 Development of MMA electrodes for offshore fabrication D. S. Tayler;G. M. Evans
13. Welding Journal v.69 no.12 Microstructure and impact toughness of C-Mn weld metals L.-E. Svensson;B. Gretoft
14. Welding Journal v.75 no.8 Microstructure and properties of ferritic steel welds containing Ti and B G. M. Evans
15. Welding Journal v.62 no.8 The development of a ferritic consumable for welding grain-refined Fe-12Ni-0.25Ti to retain toughness at 4.2K H. J. Kim;J. W. Morris, Jr.
16. Welding Journal v.55 no.5 Hydrogen cracking in weld metals M. McParlan;B. A. Graville
17. Welding Journal v.65 no.1 Resistance to hydrogen cracking in steel weld metal P. H. M. Hart
18. Welding Journal v.68 no.1 Evaluation of weld metal cold cracking using the G-BOP test A. P. Chakravarti;S. R. Bala
19. Proc. of 42th National Welding Conf., paper 49 Recent research into the control of hydrogen cracking in steel weldment J. L. Davidson
20. International Metals Review, Review v.212 Effect of metallurgical variables on Environmental fracture of steels I. M. Bernstein;A. W. Thompson
21. Proc. of 1st Int. Conf. on current solutions to hydrogen problems in steels Current solutions to hydrogen problems in steels G. M. Pressouyre;G. M. Pressouyre(ed.);C. G. Interrante(ed.)
22. Offshore Technology Report-OTO 1999 056 A Review of the effect of microstructure on the hydrogen embrittlement of high strength offshore steels M. J. Robinson;P. J. Kilgallon
23. Welding Journal v.58 no.9 Hydrogen cracking in high strength weld metal F. Watkinson
24. TWI Report 461/1992 Effects of arc energy, plate thickness and preheat on C-Mn steel weld metal hydrogen cracking R. J. Pargeter
25. Welding Journal v.61 no.7 The formation of Chevron cracks in submerged arc weld metal D. J. Allen;B. Chew;P. Parris
26. Symp. on Japan Welding Engineering Soc. Welding metallurgy of TMCP steel F. Matsuda(ed.)
27. Welding Journal v.62 no.5 Influence of electroslag weld metal composition on hydrogen cracking R. Thibau;S. R. Bala
28. Welding Journal v.77 no.12 A study on transverse weld cracks in thick steel plate with FCAW process. H. W. Lee;S. W. Kang;D. S. Um
29. Quarterly Journal of Japan Welding Soc. v.15 no.4 A study on transverse weld cracks in 50mm thick steel plate with SAW process Hae-Woo Lee;Sung-Won Kang https://doi.org/10.2207/qjjws.15.563
30. Proc. of the 5th Int. Conf. on Trends in Welding Research Microstructural factors affecting hydrogen induced cold cracking in high strength steel weld metal C. Wildash;R. C. Cochrane;R. Gee;D. J. Widgery
31. Proc. of the 9th Int. Conf. on Joining of Materials The influence of hydrogen and microstructure on the tensile properties of high strength steel weld metal C. Wildash;R. C. Cochrane;D. J. Widgery
32. Welding and Metal Fab. v.68 no.7 Designing a microstructure to resist HIC in HS steels C. Wildash;R. Gee;R. C. Cochrane