한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권3호
  • /
  • Pages.112-119
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

궤도형상 데이터를 이용한 베어링 파라미터 규명

Identification of parameter for Bearing Using Orbit Data

  • 이경백 (한영대학 자동차과) ;
  • 정찬범 (전남대학교 기계공학과 대학원) ;
  • 김영배 (전남대학교 자동차공학부)
  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the identification of rotor dynamic parameters. The solution of the system equation can be obtained using least square method. The sensitivity analysis is performed to extract optimized solution, which is considered to be insensitive to inherent measurement errors. The cosine and sine term of orbit shapes can be obtain ed through the by experiment of the orbit analysis at a different speed after doing orbit analysis at an arbitrary selected speed. This values measured time domain are used to search the stiffness and damping coefficients of rotor bearing.

키워드

참고문헌

  1. Genta, G., Delprete, C. and Busa, E. 'Some Considerations on the Basic Assumptions in Rotordynamics,' Journal of Sound and Vibration, Vol. 227, No.3, pp. 611-645, 1999 https://doi.org/10.1006/jsvi.1999.2354
  2. Friswell, M. I., Garvey, S. D., Penny, J. E. T. and Smrt, M. G., 'Computing Critical Speeds for Rotating Machines with Speed Dependent Bearing Progerties,' Journal of Sound and Vibration, Vol. 213, No. 1, pp. 139-158, 1998 https://doi.org/10.1006/jsvi.1998.1503
  3. Rajan, M., Rajan, S. D., Nelson, H. D. and Chen, W. J., 'Optimal Placement of Critical Speed in Rotor-Bearing Systems,' Transactions of the ASME, Journal of Vibration and Acoustics, Vol. 109, pp. 152-157, April 1987 https://doi.org/10.1115/1.3269407
  4. Raffa, F. A. and Vatta, F., 'The Dynamic Stiffness Method for Linear Rotor -Bearing System,' Transactions of the ASME, Vol. 118, pp. 332-339, 1996
  5. Jho, Y. D., 'Complex Modal Testing and Parameter Identification of Rotor-Bearing Systems,' KAIST, 1992
  6. Roemer, M. J. and Mook, D.J., 'Mass, Stiffness, and Damping Matrix Identification: An Integrated Approach,' Transactions of the ASME, Journal of Vibration and Acoustics, Vol. 114, pp. 358-363, 1992 https://doi.org/10.1115/1.2930270
  7. Carsten Schedlinski and Michael Link. 'Identification of Rigid Body Properties Using Base Excitation and Measured Interface Forces,' ESA Conference on Spacecraft Structures, Materials and Mechanical Testing, Noordwijk, The Netherlands, 1996
  8. Tiwari, R. and Vyas, N. S., 'Non-Linear Bearing Stiffness Parameter Extraction from Random Response in Flexible Rotor-Bearing Systems,' Journal of Sound and Vibration, Vol. 203, pp. 389-408, 1997 https://doi.org/10.1006/jsvi.1996.0786
  9. Ting, T., 'Design Sensitivity Analysis of Structural Frequency Response,' AIAA Journal, Vol. 31, No. 10, pp. 1965-1967, 1993 https://doi.org/10.2514/3.49114
  10. Redmond, I., 'Defect Identification in Rotordynamic System,' Proceeding of the 15th International Modal Analysis Conference, IMAC, 1997
  11. Lee, C. W., 'Vibration Analysis of Rotors,' Kluwer Academics publishers, 1993