한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권3호
  • /
  • Pages.157-164
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

펄스-에코법을 이용한 접착접합 시험편의 정량적 비파괴 평가

Quantitative Nondestructive Evaluation of Bonded Joints utilizing Pulse-Echo Ultrasonic Test

  • 오승규 (숭실대학교 기계공학과 대학원) ;
  • 황영택 (삼척대학교 정밀기계공학과) ;
  • 이원 (숭실대학교 기계공학과)
  • 발행 : 2003.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The pulse-echo method is one of the most widely used ultrasonic techniques for application of nondestructive evaluation. Particularly, quantitative nondestructive evaluation of defects has been considered more important to assure the reliability and the safety of structure. Frequency energy in adhesive joints is based on the ultrasonic wave analysis. The attenuation coefficient upon wave amplitude and the frequency energy that is expressed in the term of wave pressure amplitude were utilized for the primary wave experiment. By means of a control experiment, it was confirmed that the variation of the frequency energy in adhesive joints depends on transition by stress variation. In this paper, the ultrasonic characteristics were measured for single lap joint and Double Cantilever Beam specimen with different fracture modes that was subjected to stress. Consequently, the data that was obtained from the adhesive specimen was analytically compared to the fracture mechanics parameter

키워드

참고문헌

  1. Adams, R. D. and Drinkwater, B. W., 'Nondestructive testing of adhesively-bonded joints,' NDT International, Vol. 30,2, pp. 93-98, 1997 https://doi.org/10.1016/S0963-8695(96)00050-3
  2. Dickstein, P., Spelt, J. and Sinclair, A., 'Application of higher order crossing feature to non-destructive evaluation : A sample demonstration of sensitivity to the condition of adhesive joints,' Ultrasonics, Vol. 29, pp. 355-365, 1991 https://doi.org/10.1016/0041-624X(91)90086-N
  3. Guyott, C. and Cawley, P., 'Evaluation of the cohesive properties of adhesive joints using ultrasonic spectroscopy,' NDT International, Vol. 21, No. 4, pp. 233-240, 1991 https://doi.org/10.1016/0308-9126(88)90336-7
  4. Tiwari, A., Henneke, E. II. and Duke, J., 'Acousto-ultrasonic technique for assuring adhesive bond quality,' J. of Adhesion, Vol. 34, pp. 1-15, 1991 https://doi.org/10.1080/00218469108026502
  5. 김정표, 석창성, 김영환, 송성진, '선형 및 비선형 초음파를 이용한 1Cr-1Mo-0.25V 의 열화평가에 관한 연구,' 한국비파괴검사학회지, 제21권, 제5호, pp. 549-555, 2001
  6. 오승규, 황영택, 장철섭, 이원, '접착접합 계면에 대한 초음파시험과 응력해석,' 대한기계학회춘계학술대회 논문집(A), pp. 361-366, 2002
  7. 김진오, 이영춘, '선 집속 초음파 현미경을 이용한 음탄성효과 측정에 의한 응력 평가,' 한국정밀공학회지, Vol. 14, No. 10, pp. 119-126, 1997
  8. 이서일, 이준현, '경계요소법을 이용한 초음파산란장 해석에 관한 연구,' 한국비파괴검사학회지, Vol. 20, No. 2, pp. 130-137, 2000
  9. Benson, R. W. and Raelson, V. J., 'Acocusto-elasticity,' Product Engineering, pp. 56-59, 1959
  10. Achenbach, J. D., 'Wave Propagation In Elastic Solids,' North-Holland, pp. 21-29, 1993
  11. 根庵勝雄, 高木賢志郞, '超音波技術,' 東京大學出版會, pp. 151-152, 1989
  12. 한국소음진동공학회, '소음진동편람,' pp. 7, 1995
  13. Chang, D. J. and Muki, R., 'Stress distribution in a lap joint under tension-shear,' Int. J. Solids and Structure, Vol. 10 pp. 503-517, 1974 https://doi.org/10.1016/0020-7683(74)90055-9
  14. 이상국, 정민화, '초음파법에 의한 발전소 고온배관 재료의 크리프손상 평가,' 한국해양공학회지, Vol. 13, No. 2, pp. 99-107, 1999