A Study on the Reconstruction of Impact Force produced by the Collision between Two Elastic Structures

탄성 충돌체간의 충격력 재현에 관한 연구

  • Published : 2003.04.01

Abstract

In this study, the equation of motion of impacting elastic structures was derived through the theory, and the shape control of impact force using correlations of the dynamic characteristics and impact force history between two elastic structures was accomplished. Through numerical analysis and experiments, the classical contact mechanisms were verified, and the effects of the relative motion between impactor and elastic structure on the impact force shape were studied, and then the shape change of impact force depending on the impact position and mode shape of cantilever beam were analyzed. The 2-DOF impactor was designed and used. Reconstruction characteristics of impact force in cantilever beam were reviewed .

Keywords

References

  1. Stevens, K. K., 'Force Identification Problems An Overview,' Proceedings of Spring Conference on Experimental Mechanics, pp. 838-844, 1987
  2. Briggs, J. C. and Tse, M. K., 'Impact Force Identification using extracted Modal Parameters and Pattern Matching,' Int. J. Impact Engng., Vol. 12, No.3, pp. 361-372, 1992 https://doi.org/10.1016/0734-743X(92)90123-B
  3. Inoue, H., Shibuya, T., Koizumi, T. and Watanabe, R., 'Measurement of Impact Force History by Deconvolution Method,' Proc. 6th Int. Congress on Experimental Mechanics, Portland Oregon, pp. 463-468, 1988
  4. Hollandsworth, P. E. and Busby, H. R., 'Impact Force Identification using the General Inverse Technique,' Int. J. Impact Engng., Vol. 8, No.4, pp. 315-322, 1989 https://doi.org/10.1016/0734-743X(89)90020-1
  5. Doyle, J. F., 'Determining the Contact Force during the Transverse impact of Plates,' Experimental Mechanics, pp. 68-72, 1993 https://doi.org/10.1007/BF02318866
  6. 조창기, 이규섭, 최의중, 류봉조, 이종원, '역분석에 의한 충격력 재현 특성,' 한국정밀공학회, '97년도 춘계학술대회 논문집, pp. 640-644, 1997
  7. Hunt, K. H. and Crossley, F. R. E., 'Coefficient of Restitution Interpreted as Damping in Vibroimpact,' J. of Applied Mechanics, ASME, pp. 440-445, June 1975