New Design Method for Pile Group Under Vertical Load

연직하중을 받는 무리말뚝의 새로운 설계 방법

  • 이수형 (대우건설 기술연구소) ;
  • 정충기 (서울대학교 지구환경시스템공학부)
  • Published : 2003.02.01

Abstract

Current design of pile group is based on the estimation of the overall bearing capacity of a pile group from that of a single pile using a group efficiency. However, the behaviors of a pile group are influenced by various factors such as the method of pile installation, pile-soil-pile interaction, cap-soil-pile interaction, etc. Thus, it is practically impossible to take into account these factors reasonably with the only group efficiency. In this paper, a new method for the design of pile groups is proposed, where the significant factors affecting the behavior of a pile group are considered separately by adopting several efficiencies. Furthermore, in the proposed method, the load transfer characteristics of piles and the difference of pile behaviors with respect to the pile locations in group can be taken into account. The efficiencies for the method are determined using the settlement failure criterion, which is consistent with the concept of allowable settlement fur structures. The efficiencies calculated from the results of existing model tests are presented, and the bearing capacity of a pile group in the other model test is calculated and compared with that from the test result to verify the validity of the proposed method.

현행 무리말뚝 설계에서는 하나의 무리효율을 이용하여 개별말뚝의 지지력으로부터 전체 무리말뚝의 지지력을 산정하고 있다. 그러나, 무리말뚝의 지지 거동은 말뚝 시공 방법, 말뚝지반말뚝 상호작용, 캡-지반말뚝 상호작용 등의 복합적인 영향을 받으며, 따라서 하나의 무리효율만으로 이렇게 다양한 영향 요소들을 합리적으로 고려하는 것은 불가능하다. 본 논문에서는 다양한 효율을 도입하여, 이들 영향 요소들을 분리하여 고려할 수 있는 무리말뚝 설계 방법을 제안하였다. 제안된 방법에서는 이 외에도 말뚝의 하중 전이 특성과 위치에 따른 말뚝 거동의 차이를 고려할 수 있으며, 침하 기준을 이용한 효율의 산정을 통해 침하 관점의 설계가 이루어질 수 있다. 기존의 모형실험 결과로부터 제안된 설계 방법에 적용할 수 있는 효율을 산정하여 제시하였으며, 이를 이용하여 또 다른 모형 실험의 지지력을 산정하고 시험결과와 비교함으로써 제안된 방법의 유효성을 평가하였다.

Keywords

References

  1. 대한토목학회 논문집 v.20 no.1-C 사질토 지반에서 말뚝캡이 연직하중을 받는 무리말뚝의 거동에 미치는 영향 이수형;최영석;정충기;김명모
  2. 대한토목학회 논문집 v.21 no.5-C 모형 실험을 통한 이층지반에 설치된 연직하중을 받는 무리말뚝의 거동 연구 이수형;최영석;정충기;김명오
  3. 박사학위논문 사딜토 지반에서 연직하중을 받는 무리말뚝의 지지 거동모형 이수형
  4. ASCE: Journal of the soil mechanics and foundations division v.106;GT 11 Interaction of piles and cap in piled footing Akinsumuru, J. O.
  5. Geotechnique 30 no.3 Jacked piles in London clay: interaction and group behaviour under working conditions Cooke, R. W.;Price, G.;Tarr, K.
  6. Proceedings 10th ICSMFE v.2 Deformations in sand around a cone penetrometer tip Davidson, J. L.;Mortensen, R. A.;Barreiro, D.
  7. Ph. D Dissertation, Depatment of geotechnical engineering A field study of model pile group behaviour in non-cohesive soils Influence of compaction due to pile driving Ekstrom, J.
  8. Geotechnique v.46 no.4 Centrifuge modeling of piled raft foundations on clay Horikoshi, K.;Randolph, M. F. https://doi.org/10.1680/geot.1996.46.4.741
  9. Soils and FoundationsⅦ v.VII no.3 Uitimate bearing capacity of piles driven into loose sand Kishida, H.
  10. Proceeding of 11th ICSMFE v.3 Cap-pile-soil interaction of bored pile groups Liu, J. L.;Yuan, Z. L.;Shang, K. P.
  11. ASCE : Journal of the Geotechnical Engineering v.108 no.GT12 Load transfer mechanism in piles and pile groups O'Neill, M. W.;Hawkins, R. A.;Mahar, L. J.
  12. Structural Engineering v.40 Some recent developments in the design of high buildings in Hong Kong Philcox, K. T.
  13. Ph. D Dissertation, Department of geotechnical engineering Footing with settlement-reducing piles in non-cohesive soil Phung, D. Long
  14. Canadian Geotechnical Journal v.1 no.4 Sand displacement and compaction around model friction piles Robinsky, E. I.;Morison, C. E. https://doi.org/10.1139/t64-002