Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Combustion Characteristics in a Low-Pollutant Municipal Waste Incinerator - Development and Validation of a Multi-Block Simulation Code -

저공해 도시 쓰레기 소각로의 연소특성 연구 - 다중블럭 해석 프로그램의 개발 및 검증 -

  • 손영민 (KAIST 대학원 항공우주공학전공) ;
  • 김만영 (현대자동차 승용디젤엔진시험팀) ;
  • 백승욱 (KAIST 항공우주공학)
  • Published : 2003.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

To investigate the combustion characteristics in a low-pollutant municipal waste incinerator, the generalized multi-block simulation code that can be applied to turbulent reacting flow with gaseous hydrocarbon fuel in a 3D complex geometry has been developed with nongray radiation effects. To deal with the complex geometry, structured multi-block method and the scheme which treats interfaces implicitly are adopted. The developed code is validated through various engineering problems such as curved duct flow, driven cavity flow, gray multi-block radiation, nongray radiation. and combustion in a incinerator.

Keywords

References

  1. Choi, S. M., Kim, S. J., Kim, S. K., and Yoo, Y. D., 1994, 'Topics in Waste Incinerator Research and Development,' J. KSME, Vol.34, No.8, pp. 632-642
  2. Kim, H. Y., Chun, C. K., and Hwang, H. Y., 1998, 'The Study on the Combustion Model and Combustion Characteristics for Stoker Type Incinerator,' Trans. KSME(B), Vol. 22, No. 5, pp. 627-639
  3. Lee, J. Y., Kim, S. B., Yun, Y. S., Kim, H. J., and Huh, I. S., 2001, 'Flow Analysis for the Geometry Optimization of Combustion Chamber of Central Flow Type Waste Incinerator,' Trans. KSME(B), Vol. 25, No. 2, pp. 252-259
  4. Lilek, Z., Muzaferija, S., Peric, M., and Seidl, V., 1997, 'An Implicit Finite-Volume Method using Nonmatching Blocks of Structured Grid,' Numer. Heat Transfer, B, Vol. 32, pp. 385-401 https://doi.org/10.1080/10407799708915015
  5. Thakur, S., Shyy, W., and Udaykumar, H. S., 1998, 'Multiblock Interface Treatments in a Pressure-Based Flow Solver,' Numer. Heat Transfer, B, Vol. 33, pp. 367-396 https://doi.org/10.1080/10407799808915039
  6. Denison, M. K., 1994, 'A Spectral Line-Based Weighted-Sum-of-Gray-Gases Model for Arbitrary RTE Solver,' Ph.D. Thesis, Brigham Young University
  7. Baek, S. W., Kim, H. S., Yu, M. J, Kang, S. J., and Kim, M. Y., 2002, 'Application of the Extended Weighted Sum of Gray Gases Model to Light Fuel Oil Spray Combustion,' Combust. Sci. Tech, Vol. 174, pp. 65-98 https://doi.org/10.1080/713713055
  8. Launder, B. E., and Spalding, D. B., 1974, 'The Numerical Computation of Turbulent Flows,' Comp. Methods Appl. Mech. Eng., Vol. 3, pp. 269-289 https://doi.org/10.1016/0045-7825(74)90029-2
  9. Magnussen, B. F., and Hjertager, B. H., 1976, 'On Mathematical Modeling of Turbulent Combustion with Emphasis on Soot Formation and Combustion,' 16th Symp.(Int.) Comb., Pittsburgh, pp. 719-729
  10. Fluent User's Guide, 2000, version 5.5
  11. Smith, T. F., Shen, Z. F., and Friedman, J. N., 1982, 'Evaluation of Coeffecients for the Weighted Sum of Gray Gases Model,' J. Heat Transfer, Vol. 104, pp. 602-608 https://doi.org/10.1115/1.3245174
  12. Sohn, Y.M., 2002, 'A Numerical Study on the Combustion Characteristics of Solid Fuel in a Complex Geometry,' Ph,D. Thesis, KAIST
  13. Chai, J. C. and Moder, J. P., 1997, 'Spatial-Multiblock Proccedure for Radiation Heat Transfer,' Numer. Heat Transfer, B, Vol. 31, pp. 277-293 https://doi.org/10.1080/10407799708915110
  14. Byun, D. Y., Baek, S. W., and Kim, M. Y., 2002, 'Prediction of Radiative Heat Transfor in a 2D Enclosure with Blocked-Off, Multi-Block, and Embedded Boundary Treatments,' Numer. Heat Transfer, A, in press
  15. Humphery, J. A. C., Taylor, A. M. K., and Whitelaw, J. H., 1977, 'Laminar Flow in a Square Duct of Strog Curvature,' J. Fluid Mech, Vol. 83, pp. 509-527 https://doi.org/10.1017/S0022112077001311