DOI QR코드

DOI QR Code

Vibration Analysis of Beam Supported by Plate Type Springs Considering a Contact

접촉해석이 연계된 판형 스프링 지지보의 진동해석

  • Published : 2003.05.01

Abstract

The fuel rods in the Pressurized water reactor are continuously supported by a spring system called a spacer grid which is one of the main structural components for the fuel rod cluster(fuel assembly). The fuel rods vibrate within the reactor due to coolant flow. Since the vibration, which is called flow-induced vibration(FIV) can wear away the surface of the fuel rod, it is important to understand it's vibration characteristics. In this paper, the vibration analyses and the tests for the dummy rods supported by New Doublet(ND) spacer grids are described. A new FE model which reflects the contact area between the rod and ND spacer grid spring is developed to replace the previous one by which a good agreement could not be obtained with the vibration test. The natural frequency and mode shape calculated by both the Previous FE model and the new one are compared with those of experiment for a single-spanned rod supported by two ND spacer grids. The results of the new model showed good agreement with the experiment compared with those of previous model. In addition. the new FE model is applied to the vibration analysis for the dummy rod of 2.189 mm tall continuously supported by five ND spacer grids. It is also obtained that the analysis results of the new FE model well agreed to experiment ones as the single-spanned rod.

Keywords

References

  1. Paidoussis, M. P., 1981, "Fluidelastic Vibration of Cylinder Arrays in Axial and Cross Flow." Journal of Sound and Vibration. Vol. 76, pp. 329-360. https://doi.org/10.1016/0022-460X(81)90516-2
  2. 이영선, 강영환, 최명환, 신도섭. 2000, “진동 시험 및 해석을 통한 하나로 캡슐 구조물의 구조건전성 평가," 한국소음진동공학회논문집, 제 10 권, 제 2 호. pp. 261-268.
  3. Jhung, M. J., Jang, Y. K. and Lee, J. B. 1996. "Structural Integrity of a Fuel Assembly for the Secondary Side Pipe Breaks." 한국소음진동공학회논문집, 제 6 권, 제 6 호, pp. 827-834.
  4. Stoller Report. 1995. "A Study of Grid to Rod Fretting Wear in PWR Fuel Assemblies." SMSC. Vol. 1.
  5. 송기남, 윤경호, 강흥석, 김형규. 2002. “경수로용 신형핵연료 지지격자의 기계/구조적 특성 평가," 대한기계학회 춘계학술대회논문집. KSME02S004. pp.19-24.
  6. Yoon. K. H., Song. K. N., Kang. H. S. and Kim, H. K., 2001. "Mechanical/Structural Characteristic Test and FEA of a Spacer Grid Spring/Dimple for PWR Fuel Assembly." KAERI/TR-1763/2001. KAERI.
  7. Kim, H. K., Kang, H. S., Yoon, K. H. and Song, K. N., 2001, "Experimental Investigation on the Parameters Affecting Fuei Fretting Wear," 16th Int. Conference on Structural Mechanics In Reactor Technology (SMiRT-16), Paper #1548.
  8. Kang, H. S., Song, K N., Kim, H. K., Yoon, K. H. and Lee. K. H., 2001, "Evaluation of Spacer Grid Support Performance by Vibration Test," KAERI/TR-1738/2001, KAERI.
  9. Yoon, K. H, Kang, H. S., Kim, H. K., Song, K. N. and Jung, Y. H., 2001, "Nonlinear Dynamic Buckling Behavior of Partial Spacer Grid Assembly," Journal of the Korean Nuclear Society, Vol. 33. No. 1, pp. 93-101.
  10. 강흥석, 송기남, 윤경호, 정연호, 임정식, 1998. “회전 및 굽힘 스프링 기구로 연속지지된 핵연료 봉의 진동연구,” 한국소음진동공학회 춘계학술대회논문집. pp. 454-460.
  11. 강흥석, 윤경호, 김형규, 송기남, 2000, “지지격자 스프링으로 다점지지된 환형 핵연료봉의 고유 진동해석,” 한국소음진동공학회 춘계학술대회논문집, pp. 639-646.
  12. 최명환, 강흥석, 윤경호, 김형규, 송기남, 2003, “지지격자로 지지된 모의 연료봉의 진동특성,” 대한기계학회논문집A. 제 27 권, 제 3 호. pp. 424-431. https://doi.org/10.3795/KSME-A.2003.27.3.424
  13. Kang, H. S., Song, K. N., Kim. H. K., Yoon, K. H., and Jung, Y. H., 2001, "Verification Test and Model Updating for a Nuclear Fuel Rod with Its Supporting Structure," Journal of the Korean Nuclear Society, Vol. 33, No. 1, pp. 73-82.
  14. 최명환, 강흥석, 송기남, 윤경호, 김형규, 2002, “접촉해석이 연계된 스프링 지지보의 진동해석,” 한국소음진동공학회 춘계학술대회논문집, pp. 1216-1221.
  15. 이상설 외 7 인, 2000, “연료봉 지지거동 및 진동해석 모델검증시험,” KAERI/CM-328/99, 한국항공우주연구원
  16. Hibbit, H. D., Karlsson, G. I. and Sorensen, E. P., 1999, ABAQUS/Standard User's Manual. Version 5.8, HKS Inc., RI, USA.
  17. SDRC, 2000, I-DEAS Master $Series^{TM}$, Structural Dynamics Research Corporation, OH, USA.
  18. 강흥석, 윤경호, 김형규, 송기남, 정연호, 2002, “핵연료집합체 지지격자로 지지된 연료봉의 진동특성-개발중인 지지격자와 모의 연료봉의 진동시험,” 4th ASINCO 9th KINS Workshop on the Integrity of Nuclear Safety, B07/3.
  19. Ewins, D. J., 1984, Modal Testing: Theory and Practice, John Wiley & Sons Inc.,