Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Al-SiCp Composite Coating by Plasma Thermal Spray

플라즈마 용사에 의한 Al-SiCp 복합재료 코팅층의 제조

  • Published : 2003.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

Al-SiC$_{p}$ composite layer was prepared by plasma thermal spray on aluminum substrate using composite powder prepared by mechanical alloying. Mechanically alloyed powder was achieved after 24 h milling, which was used for thermal spray coating. The correlations between process conditions and thickness/porosity were analyzed, and increase of hardness was confirmed. The presence of Al-Si-C-O compound was detected by TEM analysis.

기계적 합금화법에 의해 준비된 복합분말을 이용하여 용사공정에 의해 알루미늄 모재에 Al-SiC$_{p}$ 복합재료 코팅층을 형성하였다. 24h milling 후 복합화된 분말을 제조할 수 있었으며, 이 분말을 용사하여 복합재료 코팅층을 형성할 수 있었다. 코팅층의 두께 및 기공율과 공정변수와 관계를 분석하였으며, 경도의 증가를 확인하였다. 또한 TEM분석에 의해 Al-Si-C-O 화합물의 존재를 확인하였다.

Keywords

References

  1. Acta Mater. v.48 Modeling the Effect of Temperature on the Wear Resistance of Metal Reinforced with Ceramic Particles J.Rodriguez;A.Martin;J.Llorca https://doi.org/10.1016/S1359-6454(99)00356-0
  2. J. Mater. Sci. v.17 Composites of Aluminium Alloys: Fabrication and Wear Behavior F.M.Hosking;F.F.Portillo;R.Wunderlin;R.Mehrabian https://doi.org/10.1007/BF00591483
  3. Matal. Trans. v.7B Aluminum Matrix Composites: Fabrication and Properties A.Sato;R.Mehrabian
  4. Am. Ceram. Soc. Bull. v.77 no.12 MMCs for Automotive Applications M.V.Kevorkijan
  5. Surface and Coating Technol. v.90 Effect of Ion Implantation on the Dry Sliding Wear Behavior of SiC Reinforced Al-Si Composite X.Y.Li;K.N.Tandon https://doi.org/10.1016/S0257-8972(96)03108-8
  6. The Science and Engineering of Thermal Spray Coating L.Pawlowski
  7. Introduction to Metal Matrix Composites(in Jpn.) Y.Nishida
  8. US patent 3,961,945 Aluminum-silicon Composite R.N.Sanders;A.R.Valdo
  9. Tran. Kor. Soc. Auto. Eng. v.7 no.9 A Study on the Preparation and Wear Characteristics of TiC Hardfaced Layers on Aluminium Alloy by PTA Method J.W.Min;S.E.Yoo
  10. J. of Thermal Spray Technol. v.7 no.1 Aluminum-silicon Carbide Coatings by Plasma Spraying K.Ghosh;T.Troczynski;A.C.D.Chaklader https://doi.org/10.1007/s11666-006-5007-5
  11. J. Kor. Weld. Soc. v.18 no.5 Thermal Sprayed AlSiMg/TiC Composite Coatings-fabrication of Powder and Characteristics of Coatings (Ⅰ) B.M.Yang;E.S.Byon;K.C.Park
  12. Ann. Rev. Mater. Sci. v.13 Mechanical Alloying P.S.Gilman;J.S.Benjamin https://doi.org/10.1146/annurev.ms.13.080183.001431
  13. Plasma-spray Coating R.B.Heimann
  14. Applied Experimental Design S.H.Park
  15. J. Met. v.13 Process Variables in Plasma-jet Spraying D.R.Mash;N.E.Weare;D.L.Walker
  16. Proceedings of the 16th Thermal Spray Technol. Workshop(Seoul) Effects of the Process Parameters on the Coating Properties of the APS Alumina-titania Coatings H.S.Choi;C.M.Han;C.H.Lee;H.J.Kim