Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction of Initiation Location and Direction of Fretting Fatigue Crack

프레팅 피로 균열의 발생 위치 및 방향 예측

  • Huh, Yong-Hak ;
  • R. E. Edwards (Department of Mechanical Engineering, Univ. of Sheffield) ;
  • M.W. Brown (Department of Mechanical Engineering, Univ. of Sheffield) ;
  • E.R. de Ios Rios (Department of Mechanical Engineering, Univ. of Sheffield)
  • 허용학 (한국표준과학연구원 환경안전연구센터) ;
  • ;
  • ;
  • Published : 2003.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Governing parameters for determination of the location of crack initiation and direction of crack initiation were investigated by performing fretting fatigue tests and analysis on Al 2024-T351. Fatigue tests were carried out using biaxial fatigue machine. It was shown that the dominant fatigue crack tended to initiate at the outer edge of one of the four bridge pads, growing at an angle beneath a pad, before turning perpendicular to the orientation of the axial load. Distribution of stresses generated during fretting fatigue loading along the interface was calculated by elastic FE simulation. It can be known that the location of crack initiation can be predicted by using the maximum tangential stress range. Futhermore, the crack initiation direction can also be predicted by a maximum tangential stress range.

Keywords

References

  1. Farris, T. N., Grandt, A. F., Harish, G. and Wang, H. L., 1996, 'Analysis of Widespread Fatigue Damage in Structural Joints,' 41st Int. SAMPE Symp. and Exhibition
  2. Hattori, T., 1994, 'Fretting Fatigue Problems in Structural Design,' Fretting Fatigue, ESIS 18, pp. 437-451
  3. Szolwinski, M.P., Harish, G., McVeigh, P.A., and Farris, T.N., 1996, 'The Role of Fretting Crack Nucleation in the Onset of Widespread Fatigue Damage:Analysis and Experiments,' Symp. on the Continued Airworthiness of Aircraft Structures, pp. 585-596
  4. Connor, Z.M., Li, W., Fine,M.E. and Achenbach, J.D., 1997, 'Fatigue Crack Initiation and Growth in Reveted Specimens: An Optical and Microscopic Study,' Int. J. Fatigue, 19 : Supplement No. 1, January, pp. S331-S338 https://doi.org/10.1016/S0142-1123(97)00046-7
  5. Dang Van K., Griveau B., and Message G., 1989, 'On a New Multiaxial Fatigue Limit Criterion: Theory and Applications,' in Biaxial and Multiaxial Fatigue, pp. 479-496
  6. Ruiz C., Boddington P.H.B. and Chen K.C., 1984, 'An Investigation of Fatigue and Fretting in a Dovetail Joint,' Exp. Mech., pp. 208-217 https://doi.org/10.1007/BF02323167
  7. Lamacq V., Dubourg M.C. and Vincent L., 1996, 'Crack Path Prediction under Fretting Fatigue a Theoretical and Experimental Approach,' ASME Tribal., Vol. 118, pp. 711-720 https://doi.org/10.1115/1.2831599
  8. Nowell D., and Hills D.A., 1987, 'An Analysis of Fretting Fatigue,' Proc. Instn. Mech. Engrs., pp. 965-973
  9. Yamashita N. and Mura T., 1983, 'Contact Fatigue Crack Initiation under Repeated Oblique Force,' Wear, Vol. 91, pp. 235-250 https://doi.org/10.1016/0043-1648(83)90257-0
  10. de los Rios R.A. and Orlov E., 1998, 'The Effect of Shot Peening on the Fretting Fatigue Fracture of BS L65 Copper Aluminum Alloy,' Progress Report, U. of sheffield
  11. Johnson, K.L., 1985, Contact Mechanics, Cambridge University Press
  12. B.H. Lee and S.B. Lee, 1997, 'An Experiment Study on the Fretting Fatigue Crack Behaviour of Al2024-T4,' Transactions of the KSME (A), Vol. 21, No.3. pp. 511-519

Cited by

  1. Evaluation of Fretting Fatigue Behavior for Inconel Alloy at 320℃ vol.35, pp.8, 2011, https://doi.org/10.3795/KSME-A.2011.35.8.951