The Arc Brazing by Variable Polarity AC Pulse MIG Welding Machine

극성가변 AC 펄스 MIG용접기를 이용한 아크 브레이징

  • 조상명 (부경대학교 신소재공학부 생산가공공학전공) ;
  • 공현상 ((주)동화엔텍 연구개발부)
  • Published : 2003.08.01

Abstract

MIG brazing is used for many parts without melting base metal because of high productivity. Pulsed MIG brazing can be used to further reduce heat input and to improve the process stability. However, a significant amount of zinc in galvanized sheet steel is burned off in the area of brazes. Therefore, the brazing method to reduce the heat input is needed. In the brazing for galvanized sheet steel, variable polarity AC pulse MIG arc brazing can be applied to more decrease the heat input by setting EN-ratio adequately. In this research, we studied for the variable polarity AC pulse MIG arc brazing to decrease the heat input by using ERCuSi-A wire. As the result of increasing EN-ratio, melting ratio of base metal and burning off of zinc were reduced in galvanized sheet steel.

Keywords

References

  1. Welding Journal Variable Polarity Improves Weld Brazing of Galvanized Sheet A.Joseph;C.Webb
  2. 溶接ア-クの物理 溶接學會 ラソヵスタ
  3. Improve Sheet Metal Welding Zuality & Productivity with AC Pulsed Welding System IIW Doc.XII-1629-00 T.Ueyama;H.Tong;S.Harada
  4. Master's Thesis of Pukyoung National University Design Concept and Output Characteristic of AC Pulse Waveform for MIG Welding of Al sheet S.L.Lim
  5. Light Metals Welding v.37 New Current Waveform Control for Aluminum Welding T.Mita
  6. 용접-접합편람 대한용접학회(편)
  7. 용접-접합 용어사전 대한용접학회
  8. The Journal of the Minerals Metals & Materials Society v.49 Process Modeling With Neural Networks for Pulsed GMAW Braze Welds D.White;J.Jones
  9. Welding in the World v.45 Braze Welding of Galvanised Steel Pipes B.Godec;V.Grdun
  10. Welding in the World v.45 MIG Brazing of Galvanised Light-Gauge Sheets Hackl
  11. Proceedings of the 2002 Sporing Annual Meeting of Korean Welding Society Design Concept and output Characteristic of AC Pulse Waveform for MIG Welding of Al Sheet S.L.Lim;H.S.Kong;S.M.Cho
  12. Proceedings of the 2001 Annual Autumn Meeting of Korean Welding Society v.38 The Effect of EN Ratio in AC Pulse Welding Affected Burn Through on MIG Welding for Sheet Al Metal H.S.Kong;S.L.Lim;S.M.Cho
  13. Welding Journal A Guide to GMA Welding of Aluminum B.Altshuller