대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제27권10호
  • /
  • Pages.1772-1777
  • /
  • 2003
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

센서화된 초탄성 마이크로그리퍼의 설계, 제작 및 성능평가

Design, Fabrication, and Performance Evaluation of a Sensorized Superelastic Alloy Microrobot Gripper

  • 김덕호 (한국과학기술연구원 마이크로시스템센터) ;
  • 김병규 (한국과학기술연구원) ;
  • 강현재 (한국과학기술연구원 마이크로시스템센터) ;
  • 김상민 (한국과학기술연구원 마이크로시스템센터)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the design, fabrication, and calibration of a piezoelectric polymer-based sensorized microgripper. Electro discharge machining technology is employed to fabricate super-elastic alloy based micro gripper. It is tested to present improvement of mechanical performance. For integration of force sensor on the micro gripper, the sensor design based on the piezoelectric polymer PVDF film and fabrication process are presented. The calibration and performance test of force sensor integrated micro gripper are experimentally carried out. The force sensor integrated micro gripper is applied to perform fme alignment tasks of micro opto-electrical components. It successfully supplies force feedback to the operator through the haptic device and plays a main role in preventing damage of assembly parts by adjusting the teaching command.

키워드

참고문헌

  1. Zhou, Y., and Nelson, B. J., 2000, 'The Effect of Material Properties and Gripping Force on Micrograsping,' Proceedings of 2000 IEEE Conference on Robotics and Automation, pp. 1115-1120 https://doi.org/10.1109/ROBOT.2000.844748
  2. Kim, C. J., and Pisano, A. P., 1992, 'Polysilicon Microgripper,' Senors and Actuators, A, Vol. 33, pp. 221-227 https://doi.org/10.1016/0924-4247(92)80169-4
  3. Menciassi, A., Scalari, G., Eisinberg, A., Anticoli, C., Francabandiera, P., Carrozza, M.C., and Dario, P., 2001, 'An Instrumented Probe for Mechanical Characterization of Soft Tissues,' Biomedical Microdevices, pp. 149-156 https://doi.org/10.1023/A:1011454427384
  4. Tanikawa, T., and Arai, T., 1999, 'Development of Micro-manipulation System having a Two-fingered Micro-hand,' IEEE Transactions on Robotics and Automation, Vol. 15, No. 1, pp. 152-162 https://doi.org/10.1109/70.744610
  5. Arai, F., Lee, G. U., and Colton, R. J., 1998, 'Integrated Microendeffector for Micromanipulation,' IEEE/ASME Transactions on Mechatronics, Vol. 3, No. 1, pp. 17-23 https://doi.org/10.1109/3516.662864
  6. Kim, S.-M., Kim, K., Shim, J.-H., Kim, B. K., Kim, D.-H., and Chung, C.-C., 2002, 'Position and Force Control of a Sensorized Microgripper,' Proceedings of the 2002 International Conference on Control, Automation and System, pp. 319-322
  7. Fung, C., Elhajj, I., Li, W. J., and Xi, N., 2002, 'A 2D PVDF Force Sensing System for Micromanipulation and Microassembly,' Proceedings of IEEE International Conference on Robotics and Automation, pp. 1489-1494 https://doi.org/10.1109/ROBOT.2002.1014754
  8. Dargahi, J., Parameswaran, M., and Payandeh, S., 2000, 'A Micromachined Piezoelectric Tactile Sensor for an Endoscopic Grasper-Theory, Fabrication and Experiments,' Journal of Microelectromechanical Systems, Vol. 9, No. 3, pp. 329-335 https://doi.org/10.1109/84.870059
  9. M. Goldfarb and N. Celanovic, 1999, 'A Flexure-based Gripper for Small-scale Manipulation,' Robotica, Vol. 17, No. 2, pp. 181-188 https://doi.org/10.1017/S026357479900096X
  10. K. B. Lee and Y.-H. Cho, 2001, 'Laterally-driven Electrostatic Repulsive-force Microactuator,' Transaction of the KSME, A, Vol. 25, No. 3, pp. 424-433
  11. Min, H.-J., Lim, H.-J., Kim, B., and Kim, S. H., 2002, 'Design and Performance Evaluation of Impact Type Actuator using Magnetic Force,' Transaction of the KSME, A, Vol. 26, No. 7, pp. 1438-1445 https://doi.org/10.3795/KSME-A.2002.26.7.1438
  12. Transaction of the KSME,A v.26 no.7 Design and Performance Evaluation of Impact Type Actuator using Magnetic Force Min,H.J.;Lim,H.J.;Kim,B;Kim,S.H. https://doi.org/10.3795/KSME-A.2002.26.7.1438