참고문헌
- Kang, S. H., Park, W. J. and Bae, S. H., 1993, 'A Study on Discharge GAp in CAD/CAM Wire Electric Discharge Mchining,' Trans. of KSME, Vol. 17, No. 2, pp. 380-384
- McGeough, J. and Rasmussen, H., 1977, 'A Theretical Model of Electrodischarge Texturing,' J. of Materials Processing Technology, Vol. 68, pp. 172-178 https://doi.org/10.1016/S0924-0136(96)00024-6
- Kunieda, M., and Yanatori, K., 1996, 'Study on Debris Movement in EDM Gap,' Int'l J. of Electrical Machining(IJEM), No. 2, pp. 43-49
- Schumacher, B. M., and Agie, A. G., 1990, 'About the Role of Debris in the Gap During Electrical Discharge Machining,' Annals of the CIRP, Vol. 39, No. 1, pp. 197-199 https://doi.org/10.1016/S0007-8506(07)61034-8
- Luo, Y. F., 1997, 'The Dependence of Interface Discharge Transitivity upon the Gap Debris in Precision Electrodischarge Machining,' J. of Materials Processing Technology, Vol. 68, pp. 121-131 https://doi.org/10.1016/S0924-0136(96)00019-2
- Furutani, K., Saneto, A., Takezawa, H., Mohri, N. and Miyake, H., 2001, 'Accretion of Titanium Carbide by Electrical Discharge Machining with Power Suspended in Working Fluid,' J. of Int'l Scientist for Precision Engineering and Nanotechnology, Vol. 25, pp. 138-144
- Dunnebacker, G., 1992, 'High Performance Electrical Discharge Machining using Water-based Dielectric,' Proc. of the 10th Int'l. Symp. for Electromachining (ISEM-X), pp. 161-169
- Bichsel, D. and Kocher, M., 1998, 'Contamination Evolution in EDM Sinking,' Proc. of the 12th Int'l. Symp. for Electromachining (ISEM-XII), pp. 351-358
- Charmilles Technologies Co., 1993, Operating Manual
- Cornelissen, H., Snoeys, R., and Kruth, J. P., 1977, 'Investigation on the Optimal Machining Conditions for Electro-Discharge Machining of Cemented Carbides,' 5th North American Metalworking Research Conference(NAMRC-V), pp. 258-263
- Kim, C. H. and Kruth, J. P., 2002, 'Influence of the Electrical Conductivity of Dielectric on Machinability of WEDM,' Trans. of KSME (A), Vol. 26, No. 2, pp. 322-328
- Kim, C. H. and Kruth, J. P., 2001, 'Influence of the Electrical Conductivity of Dielectric on WEDM of Sintered Carbide,' KSME Int'l Journal, Vol. 15, No. 12, pp. 1676-1682
- Maggi, F., 1991, 'Wire cut Electro-Erosion of Hard Metals,' Agie Erosion Technology, pp. 1-8
- Kobashi, K., 1995, 'The Present and Future Developments of EDM & ECM,' Proc. of the 10th Int'l. Symp. for Electromachining(ISEM-XI), pp. 161-169
- Gadalla, A. M., and Tsai, W., 1989, 'Electrical Discharge Machining of Tungsten Carbide-Cobalt Composites,' J. of American Ceramic Society, Vol. 72, No. 8, pp. 1396-1401 https://doi.org/10.1111/j.1151-2916.1989.tb07660.x
- Kim, M. G., Ki, J. K, and Tai, W. P., 1993, 'Fatigue Fracture Characteristics at a Electrio Discharge Mchinied Surface in High Strength Steel,' Trans. of KSME, Vol. 17, No. 1, pp. 21-26