Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Combustion Characteristics of Diesel-water Emulsion with High Pressure Injection

고압분사 경유-물 혼합연료의 연소특성

  • 정대용 (성균관대학교 대학원 기계공학부) ;
  • 이종태 (성균관대학교 기계공학부)
  • Published : 2003.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Combustion characteristics on diesel-water emulsion are analyzed in high pressure injection for several variables such as water content, injection pressure and injection timing. As a fact of well-known, maximum combustion pressure was decreased and ignition delay was elongated in accordance with increasing of water content. But these characteristics were enhanced with increase of injection pressure to high pressure. It was shown that combustion of neat diesel in case of injecting with 600bar is similar to that of 20 % diesel-water emulsion was injected at 1200 bar.

Keywords

References

  1. Afify, E. M., 1985, 'Performance Combustion Characteristics and Exhaust Emission of a Direct Injection Diesel Engine Using Water/Oil Emulsions as Fuel,' North Carolina State University
  2. Crookes, R. J., Nazha, M.A.A., Janoter, M.S., Story, T.,1980, 'Investigation into the Combustion of Water/Diesel Fuel Emulsion,' SAE paper 80094
  3. Stump, G., Polach, W., Muller, N. and Warga, J., 1989, 'Fuel-injection Equipment for Heavy Duty Diesel Engines for U.S. 1991/1994 Emission Limits,' SAE 890851
  4. Schwartz, R., 1985.:'High-Pressure Injection Pumps with Electronic Control for Heavy-Duty Diesel Engines,' SAE 850170
  5. Oblaender, K., Kollmann, K., Kraemer, M. and Kutschera, I., 1989.:'The Influence of High Pressure Fuel Injection on Performance and Exhaust Emission of High Speed Direct Injection Diesel Engines,' SAE Trans. paper 890438
  6. Daeyong Jeong, Hyunsang Ha, Jongtai Lee, 1998, 'A Basic Study on Combustion of Ultra High Pressure Injection,' Autumn conference proceeding of KSAE, pp. 386-392