한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제11권6호
  • /
  • Pages.127-133
  • /
  • 2003
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

야지 차량용 No Spin Differential 개발에 관한 연구

A Study on the Development of No Spin Differential for an Off-road Vehicle

  • 편영식 (선문대학교 기계 및 제어공학부) ;
  • 장영도 (선문대학교 대학원 기계공학과) ;
  • 이영춘 (통일중공업㈜) ;
  • 박정현 (선문대학교 기계 및 제어공학부) ;
  • 여진욱 (선문대학교 생산시스템기술연구소)
  • 발행 : 2003.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

NSD(No Spin Differential) has been developed fer a military truck. A benchmarking study for USA and Russian NSD has been carried out. Axiomatic approach has been applied for improving the design. A test code for NSB has been developed and applied to the developed sample. In the test results of comparing the developed sample with the USA imported sample, three major characteristics-the noise, mobility and steerability - are in the range of the intended target. A practical process for the evolution design is proposed.

키워드

참고문헌

  1. Research and Development about a Differential System for a Slip Limitation of an Off-road Vehicles Y.C.Lee;Y.C.Kim;J.H.Park;J.T.Kim
  2. NSD Annual Project Report 2000 Y.C.Lee
  3. NSD Annual Project Report 2002 Y.C.Lee
  4. Europe Intellectual Property Office
  5. Transactions of KSAE v.10 no.4 Development of Toroidal Type Continuously Variable speed Transmission for Agricultural Tractor II E.H.Kim;J.C.Lee
  6. The Principles of Design N.P.Suh
  7. Transactions of KSAE v.7 no.6 Weight Rediuction in Automobile Design Through Axiomatic Approach Y.R.Moon;S.W.Cha;P.Y.Yoon
  8. ASME v.117 Axiomatic Design of Mechanical System N.P.Suh
  9. Transactions of KSAE v.16 no.5 Axiomatic Approach for Design Appraisement and Development DVD Y.R.Moon
  11. APM WinMachine Designmecha
  12. Transactions of KSAE v.8 no.2 Optimum Design of front toe Angle Using Design of Experiment and Dynamic Simulation for evaluation of Handling Performances K.H.Suh;H.K.Min;I.B.Chyun
  13. Transactions of KSAE v.7 no.8 Topology Optimization using an Optimality Criteria Method B.S.Kim;M.W.Suh
  14. Transactions of KSAE v.6 no.3 The Study of Safety Evoluation of Improvement on LOWER ARM II Y.C.Park;D.P.Yun;S.C.Hue;D.B,Jin;B.J.Lee
  15. The Machnie Design Use by CAE Software Y.S.Pyoun;K.B.Lee
  16. Transactions of KSAE v.10 no.3 Development of Toroidal Type Continuously Variable speed Transmission for Agricultural Tractor I E.H.Kim;J.C.Lee