3D Transient Analysis of Linear Induction Motor Using the New Equivalent Magnetic Circuit Network Method

  • Jin Hur (Precision Machinery Research Center, Korea Electronic Technology Institute (KETI)) ;
  • Kang, Gyu-Hong (Dept. of Electrical and Electronic Engineering, Changwon National University) ;
  • Hong, Jung-Pyo (Dept. of Electrical and Electronic Engineering, Changwon National University)
  • 발행 : 2003.09.01

초록

This paper presents a new time-stepping 3-D analysis method coupled with an external circuit with motion equation for dynamic transient analysis of induction machines. In this method, the magneto-motive force (MMF) generated by induced current is modeled as a passive source in the magnetic equivalent network. So, by using only scalar potential at each node, the method is able to analyze induction machines with faster computation time and less memory requirement than conventional numerical methods. Also, this method is capable of modeling the movement of the mover without the need for re-meshing and analyzing the time harmonics for dynamic characteristics. From comparisons between the results of the analysis and the experiments, it is verified that the proposed method is capable of estimating the torque, harmonic field, etc. as a function of time with superior accuracy.

키워드

참고문헌

  1. T. Yamaguchi Y. Kawase and Y. Hayashi, 'Dynamic Transient Analysis for Vector Controlled Motors Using 3-D Finite Element Method,' IEEE Trans. on Magnet-ics, Vol. 32, no. 3, pp. 1549-1552, May, 1996
  2. K. Yamazaki, 'Induction Motor Analysis Considering both Harmonics an End Effects using Combination of 2D and 3D Finite Element Method,' IEEE Trans. on Energy Conversion, Vol. 14, no. 3, pp. 698-703, Sep-tember, 1999
  3. P. Dziwniel, and F. Piriou , 'A Time-Stepped 2D-3D Finite Element Method for Induction Motors with Skewed Slots Modeling,' IEEE Trans. on Magnetics, Vol. 35, no. 3, pp. 1262-1265, May, 1999
  4. A. Yahiaoui and F. Bouillault, '2D and 3D Numerical Computation of Electrical Parameters of an Induction Motor,' IEEE Trans. on Magnetics, Vol. 30, no. 5, pp. 3690-3692, September, 1994
  5. J. Hur, Y. D. Chun, J. Lee and D. S. Hyun, 'Dynamic Analysis of Radial Force Density in Brushless DC Motor Using 3 Dimensional Equivalent Magnetic Cir- cuit Network Method', IEEE Trans. on Magnetics, Vol. 34, no. 5, pp. 3142-3145, September, 1998
  6. S. B. Yoon, J. Hur and D. S. Hyun, 'A Method of Op-timal Design of Single-Sided Linear Induction Motor for Transit', IEEE Trans. on Magnetics, Vol. 33, no. 5, pp. 4215-4217, November, 1997
  7. K. H Ha, J. P. Hong, G. T. Kim and T. B. Im, 'Finite Elements Analysis of Squirrel-cage Induction Motor Taking into account the End-ring', KIEE Trans., Vol. 48,no.2,pp.49-55, 1999
  8. J. Hur, H. Toliyat and J. P. Hong, 'Dynamic Analysis of Linear Induction Motors using 3-D Equivalent Magnetic Circuit Network (EMCN) Method', Journal of Electric Power Components and Systems, Vol. 29, No.6, pp. 531-541, June, 2001 https://doi.org/10.1080/153250001300338763
  9. J. Hur, D. S. Hyun, S. S. Kim, G. H. Kang and J. P. Hong, 'Three Dimensional Eddy Current Calculation Using Magnetic Scalar Potential in Conducting Re-gions,' Journal of Applied Physics, Vol. 91, No. 10, pp. 8314-8316, May, 2002 https://doi.org/10.1063/1.1456047