DOI QR코드

DOI QR Code

A Study on Annealing of Fe-Si-B-Ni Amorphous Alloy

Fe-Si-B-Ni 비정질 합금의 어닐링에 관한 연구

  • Published : 2003.11.01

Abstract

A Fe-Si-B-Ni amorphous alloy manufactured by one roll melt-spinning method showed the crystallization temperature difference of a maximum $10^{\circ}C$ according to each lot. This temperature difference had a considerable influence on the annealing process to be conducted for obtaining the proper inductance of the alloy. The proper annealing temperature of the alloy was $480^{\circ}C$ and the annealing time increased as the crystallization temperature increased. The activation energy measured by Kissinger method increased as the crystallization temperature increased. Therefore, the annealing process must be adjusted by the crystallization temperature difference of the amorphous alloy.

Keywords

References

  1. S. Takayama, J. Mater. Sci., 38, 41 (1979)
  2. H. Jones and C. Suryanarayana, J. Mater. Sci., 8, 705 (1973) https://doi.org/10.1007/BF00561226
  3. H. Jones, Rep. Prog. Phys., 36, 1423 (1973) https://doi.org/10.1088/0034-4885/36/11/002
  4. H. Chung and S. Sastri, Metal!. Trans. A, 8A, 1063 (1977)
  5. T. Masumoto and R. Maddin, Acta Met., 19, 725 (1971) https://doi.org/10.1016/0001-6160(71)90028-9
  6. Y. I. Chang, J. Y. Kim and Y. S. Song, J. Kor. Magn. Soc., 10(1), 1 (2000)
  7. C. S. Tsai, B. J. Li, K. L. Jean and C. S. Lin, J. Appl. Phys., 67(9), 5586 (1990) https://doi.org/10.1063/1.345892
  8. T. Masumoto and R. Maddin, Mater. Sci. Eng., 19, 1 (1975) https://doi.org/10.1016/0025-5416(75)90002-6
  9. H. S. Chen and J. T. Krause, Scripta Metall., 11, 761 (1977) https://doi.org/10.1016/0036-9748(77)90072-2
  10. F. E. Luborsky, IEEE Trans. Magn., MAG-11, 1644 (1975) https://doi.org/10.1109/TMAG.1975.1058974
  11. H. Karamon, J. appl. Phys., 63, 4306 (1988) https://doi.org/10.1063/1.340210
  12. H. E. Kissinger, Anal. Chem., 29, 1702 (1957) https://doi.org/10.1021/ac60131a045