Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Acting Load in the Vane Tip of Vane Pump for Design

베인펌프 설계를 위한 베인 선단부의 작용력에 관한 연구

  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The radial acting load of vane on the camring in oil hydraulic vane pumps with and without intra­vanes have been investigated. The influences of the discharge pressure and rotating speed of the vane to the load were discussed. The variations of the radial acting load of a vane were calculated on the basis of the results measured for the dynamic internal pressure in the four chambers surrounding a vane. It provides essential information for the study of pump dynamics and control, the pump design and the analysis of tribological problems in the sliding components.

Keywords

References

  1. ASLE Trans. v.22 no.4 Wear in the Vane Pump Test Hirata,M.;Watanabe,H.
  2. Trans. JSME v.46 Experiment in Prediction of Wear Life of Vane Pump Saki Kunio(et al.) https://doi.org/10.1299/kikaib.46.1687
  3. ASLE Trans. v.13 no.3 An Experimental Study of the Wear Caused by Loose Abrasive Particles in Die Tao,F.F.;Appeldoorm,J.K. https://doi.org/10.1080/05698197008972293
  4. 日本機械學會集 v.42 no.356 壓力 平衡形 ベ-ソモ-タの 起動·低速時の トルク 特性 日比昭;日川常雄
  5. 東京工業大學 學位 論文 可變 容量形 ベ-ソ ホoソフo の 特性に關する硏究 上野久儀
  6. Trans. JSME v.52 Wear in the Vane and the Cam Ring of a Vane Pump Ueno Hisanori(et al.) https://doi.org/10.1299/kikaib.52.2990
  7. Trans. JSME. v.54 no.504 Measurement of Dynamic Pressure around the Vane in an oil Hydraulic Vane Pump Jung,J.Y.;Kyogoku,K.;Nakahara,T. https://doi.org/10.1299/kikaib.54.2047