Analysis of Burst Pressure for Wear-Damaged Steam Generator Tubes

마멸에 의해 손상된 증기발생기 전열관의 파열압력 해석

  • 신규인 (충북대학교 공과대학 안전공학과) ;
  • 박재학 (충북대학교 공과대학 안전공학과)
  • Published : 2003.12.01

Abstract

Generally the rupture of steam generator tubes proceeds from significant plastic deformation before failure. In this study, the burst pressures of damaged steam generator tubes were calculated from the plastic instability analysis with the finite element method. Two wear types, flat and circumferential types were considered. An equation for the burst pressure was proposed by using the strength reduction factor and the Svensson equation. The analysis results were compared with the experiment data from published references and they showed a good agreement with the experiment data.

Keywords

References

  1. Y. Mou, W. D. Reinhardt, R. K. Kizhatil and G. H. McClellan, 'Plastic Instability in Pressure Vessels and Their Role in Design', Finite Element Applications: Linear, Non-Linear, Optimization and Fatigue and Fracture ASME, PVP, Vol. 370, pp.135-142, 1998
  2. 정한섭, 김기태, 김홍덕, '증기발생기 전열관 건전성 평가기준 개발', 전력연구원 보고서(TR.96NJ14), 2000
  3. 김정수, '울진 1호기 증기발생기 전열관 인출 검사', 한국원자력연구소 보고서, 1999
  4. 김범년, 김진원, 박치용, '감육배관의 최소 허용 두께 결정방법에 대한 고찰', 대한기계학회 제2회 보일러 및 압력용기 위원회 학술대회 논문집, pp.35~41, 1999
  5. 김홍덕, 정한섭, '영광 3,4호기 울진3,4호기 증기발생기 전열관 마모 손상에 대한 건전성 평가', 한국원자력학회 추계학술발표대회 논문집, pp.1~14, 2000
  6. EPRl NP-6865-L report, 'Steam Generator Tube Integrity, Volume 1: Burst test results and validation of rupture criteria', 1991
  7. J. M. Alzheimer, R. A. Clark, C. J. Morris and M. Vagins, 'Steam Generator Tube Integrity Program Phase I Report', NUREG CR-0718, 1979
  8. P. B. Mellor, 'The Ultimate Strength of ThinWalled Shells and Circular Diaphragms Subjected to Hydrostatic Pressure', Int. J. Mech. Sci., Vol.1, pp. 216-228, 1960 https://doi.org/10.1016/0020-7403(60)90041-2
  9. M. J. Hillier, 'Tensile Plastic Instability of Thin Tubes-I', Int. J. Mech. Sci. Vol. 7, pp. 531-538, 1965 https://doi.org/10.1016/0020-7403(65)90010-X
  10. 'Abaqus/Standard User's Manual', Vol. 1, Version 6.2, Hibbitt, Karlsson and Sorensen Inc., 2001