DOI QR코드

DOI QR Code

Enhancement of the buckling strength of glass beams by means of lateral restraints

  • Belis, J. (Laboratory for Research on Structural Models, Department of Structural Engineering, Ghent University) ;
  • Impe, R. Van (Laboratory for Research on Structural Models, Department of Structural Engineering, Ghent University) ;
  • Lagae, G. (Laboratory for Research on Structural Models, Department of Structural Engineering, Ghent University) ;
  • Vanlaere, W. (Laboratory for Research on Structural Models, Department of Structural Engineering, Ghent University)
  • 투고 : 2002.11.13
  • 심사 : 2003.03.11
  • 발행 : 2003.05.25

초록

New material applications and transparency are desired by contemporary architects. Its superb transparency and high strength make glass a very suitable building material -in spite of its brittleness- even for primary load bearing structures. Currently we will focus on load bearing glass beams, subjected to different loading types. Since glass beams have a very slender, rectangular cross section, they are sensitive to lateral torsional buckling. Glass beams fail under a critical buckling load at stresses that lie far below the theoretical simple bending strength, due to the complex combination of torsion and out-of-plane bending, which characterises the instability phenomenon. The critical load can be increased considerably by preventing the upper rim from moving out of the beam's plane. Different boundary conditions are examined for different loading types. The load carrying capacity of glass beams can be increased three times and more using relatively simple, cheap lateral restraints.

키워드

참고문헌

  1. Belis, J. (2001), "Glass beams", Proceedings of the Second FTW PhD Symposium, Ghent, December.
  2. Belis, J., Van Impe, R., Lagae, G. and Buffel, P. (2001), "Glass and transparent plastics: a structural engineering point of view", Proceedings of the 7th European Conference on Advanced Materials and Processes, Rimini, June.
  3. Belis, J. (2000), "Glass structures", Proceedings of the First FTW PhD Symposium, Ghent, December.
  4. Calderdone, I. (2001), "The fallacy of the Weibull distribution for window glass design", Proceedings of the Glass Processing Days, Tampere, June.
  5. Carré, H. (1997), Tempered Glass, A New Structural Material (in French), Cahiers du CSTB, Cahier 3003.
  6. Griffith, A. (1921), "The phenomena of rupture and flow in solids", Phil. Trans. Roy. Soc. of London, 221.
  7. Hess, R. (2000), Glass Beams (in German), vdf Hochschulverlag AG an der ETH Zurich, Zurich.
  8. NBN-ENV 1993-1-1, Eurocode 3 (1992), Design of Steel Structures - Part 1-1: General Rules and Rules for Buildings, Belgian Institute for Normalisation (BIN) vzw.
  9. The Institute of Structural Engineers (ISE) (1999), Structural Use of Glass in Buildings, SETO, London.
  10. Pattheeuws, S. (2001), "Calculation of lateral torsional buckling loads with finite elements method", Graduate thesis (in Dutch), Ghent.
  11. Roelandt, M. (2000), "Lateral torsional buckling of glass beams", Graduate thesis (in Dutch), Ghent.
  12. Southwell, R.V. (1932), "On the analysis of experimental observations in problems of elastic stability", Proceedings of the Royal Society, 135A, London, 601.
  13. Timoshenko, S. and Gere, J. (1991), The Theory of Elastic Stability, 2nd edition, McGraw-Hill Book Company Inc., New York/Toronto/London.
  14. Trahair, N. (1993), Flexural-Torsional Buckling of Structures, E&FN Spon, London.
  15. Van Impe, R. (1998), Calculation of Constructions with Rasta, manual v 3.0 (in Dutch).
  16. Vernaillen, F. (2002), "Prevention of lateral torsional buckling of glass beams", Graduate thesis (in Dutch), Ghent.
  17. Weibull, W. (1951), "A statistical distribution function of wide applicability", J. of Appl. Mech., September 1951, 293-297.
  18. Young, W. (1989), Roark's Formulas for Stress and Strain, 6th edition, McGraw-Hill Book company Inc., New York/Toronto/London.

피인용 문헌

  1. Buckling of flat laminated glass panels under in-plane compression or shear vol.36, 2012, https://doi.org/10.1016/j.engstruct.2011.12.010
  2. Experimental failure investigation of a hybrid glass/steel beam vol.16, pp.4, 2009, https://doi.org/10.1016/j.engfailanal.2008.07.011
  3. Analytical and numerical assessment of the strengthening effect of structural sealant joints for the prediction of the LTB critical moment in laterally restrained glass beams vol.49, pp.6, 2016, https://doi.org/10.1617/s11527-015-0661-z
  4. Compressive behaviour of laminated structural glass members vol.33, pp.12, 2011, https://doi.org/10.1016/j.engstruct.2011.07.004
  5. Structural assessment and lateral–torsional buckling design of glass beams restrained by continuous sealant joints vol.102, 2015, https://doi.org/10.1016/j.engstruct.2015.08.021
  6. Glass Structures and Plasticity: Contradiction or Future? vol.274-276, pp.1662-9795, 2004, https://doi.org/10.4028/www.scientific.net/KEM.274-276.975
  7. A Proposal for the Consolidation of a R.C. Social Housing by Means of External Hybrid Steel-Glass Frameworks vol.638-640, pp.1662-7482, 2014, https://doi.org/10.4028/www.scientific.net/AMM.638-640.3
  8. Elastic Critical Moment for the Lateral–Torsional Buckling (LTB) Analysis of Structural Glass Beams with Discrete Mechanical Lateral Restraints vol.13, pp.11, 2003, https://doi.org/10.3390/ma13112492
  9. Simplified Lateral Torsional Buckling (LTB) Analysis of Glass Fins with Continuous Lateral Restraints at the Tensioned Edge vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6667373