Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Damage Tolerance Assessment for the Butt Lap Joint Structure with the Effects of Fretting Fatigue Cracks

프레팅 피로균열 영향을 고려한 항공기 맞대기중첩연결 구조 손상허용성 연구

  • 권정호 (울산대학교 수송시스템공학부) ;
  • 황경정 (울산대학교 항공우주공학과 대학원)
  • Published : 2003.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The butt lap joint structures which are usually designed by the concept of slow crack growth damage tolerance, show frequently the behaviors of multiple site fatigue crack growth around the fastener hole edges due to the fretting between the two jointed parts. In this paper, experimental tests of fatigue crack growth have been performed of a bolted butt lap joint structure having an initial corner crack at the fastener hole edge, with different fretting conditions under a flight load spectrum. The obtained test results were reviewed to investigate the effects of fretting fatigue cracks on the damage tolerance crack growth life. Computations of corner crack growth were also carried out using an existed model to compare with test results.

항공기 주구조에서 맞대기중첩연결(Butt Lap Joint) 구조는 저속균열성장 개념의 손상허용설계를 한다. 이러한 연결부 구조는 볼트나 리벳 구멍 가장자리의 부재간 접촉면에서 프레팅에 의한 피로균열이 발생되어 다지점 균열성장 거동을 하는 경우가 많다. 본 연구에서는 초기 모서리균열을 내재한 볼트연결 맞대기중첩연결 구조시편에 프레팅 조건을 달리하여 비행하중스펙트럼 하에서 피로균열 성장거동을 실험적으로 분석하고 잔여강도를 비교하여 프레팅이 균열성장과 손상허용성에 미치는 영향을 고찰하였다. 또한 기존의 응력강도식으로 모서리균열의 성장패턴을 예측하고 실험결과와 비교 분석하였다.

Keywords

References

  1. Aircraft Structural Integrity Program, Airplane Requirement., MIL-STD-1530A, Dec. 1975, pp.4-8.
  2. Aircraft Damage Tolerance Requirement., MIL-A-83444 (USAF), July 1974, pp.2-12.
  3. Gallagher, J. P., Giessler, F. J., Berens, A. P., and Engle, R. M., Jr., USAF Damage Tolerant Design Handbook: Guidelines for the Analysis and Design of Damage Tolerant Aircraft Structures, AFWAL-TR-82-3073, May 1984, pp. 5-16.
  4. Barrois, W. G., "Manual on the Fatigue of Structures-H. Causes and Prevention of Structural Damage-7. Mechanical Surface," AGARD-MAN-10, 1981, pp.9-21.
  5. Hahn, G. T. and Rubin C. A., "Fretting Corrosion in Airframe Riveted and Pinned Connections," Technical Report AFRL- SR -BL - TR-98-0339, March, 1998, pp.11-15.
  6. Hoeppner, D. W., "Fretting of Aircraft Control Surfaces," AGARD-CP-161, 1975.
  7. Speaker, E. R., "Advance Fastener Technology for Composite and Metallic Joints," ASTM STP 927, 1986, pp.47-59.
  8. Hoeppner, D. W. and Adibnazari, S., "Fretting Fatigue in Aircraft Joints," ICAF Doc. No. 1951, Vol. 1, 1993, pp.191-205.
  9. Piascik, R. S. and WiIlard, S. A., "The Characterization of Fatigue Damage in the Fuselage Riveted Lap Splice Joint," NASA/TP-97-206257, 1999.
  10. Murakami, Y.(Editor-in-Chief), Stress Intensity Factors Handbook, Vol. 2, Pergamon Press, Japan, 1987, pp.641-665.
  11. Smith, H. W., "Damage Tolerance Analysis of Aircraft Structures," The University of Kansas, Div. of Continuing Education, 1991, pp.24-26.
  12. Achtner, G. and Stronge, T. D., "Ground Rules for Damage Tolerance Assessment of F-5E/F Aircraft," Northrop Technical Report NOR 76-172, 1976, pp.5-22.
  13. Maksimenko, V. N. and Cendrovsky, A. V., "Stress Intensity Factor Definition for Complicated Form Cracks in Anisotropic Plates," J. of Appl. Mech. and Tech. Phys. No. 6, 1986.
  14. Forman, R. G., Kearney, V. E. and Engle, R. M., "Numerical Analysis of crack propagation in cyclic loaded structures", J. Bas. Engng. Trans., ASME, Ser. D. 89, 459, 1967, pp.459-471. https://doi.org/10.1115/1.3609637
  15. Willenborg, J., Engle, R. M. and Wood, H. A., "A Crack Growth Retardation Model Using an Effective Stress Concept," AFFDL-TM-71-1, 1971.
  16. 권정호, 황돈영, "비행모사 하중스펙트럼 하에서 피로균열성장하한계를 고려한 균열성장수명 거동의 고찰,” 한국항공우주학회지, 제24권, 제6호, 1996, pp.98-108.
  17. The crack growth analysis computer program "AFGROW", AFRL/VASE, US Air Force Wright-Patterson Research Laboratory, Ohio, USA. 1994.