A Study on the Performance of PEMFC Using the TiN-Coated 316 Stainless Steel Bipolar Plates

TiN이 코팅된 316 스테인리스강 분리판을 이용한 고분자전해질 연료전지의 성능에 관한 연구

  • Cho, Eun-Ae (Fuel Cell Research Center, Korea Institute of Science and Technology)
  • 조은애 (한국과학기술연구원 연료전지연구센터)
  • Published : 2003.12.30

Abstract

As an alternative bipolar plate material for polymer electrolyte membrane fuel cell (PEMFC), TiN-coated 316 stainless was evaluated in terms of electrical contact resistance and water contact angle. Performance and lifetime of the TiN-coated 316 bipolar plates were measured in comparison with those of graphite and bare 316 bipolar plates. At a cell voltage of 0.6 V, current density of the single cells using graphite, AISI 316, and TiN/316 bipolar plates was 996, 796, and $896mA/cm^2$, respectively. By coating 316 stainless steel with TiN layer, performance degradation rate determined to be the voltage degradation rate at a cell voltage of 0.6 V was reduced from 2.3 to 0.43 mV/h.

Keywords

References

  1. J. R. Selman, 'Fuel Cells ; Trends in Research and Application', Electric Power Research Institute, Calif., 1986
  2. D. Linden, 'Handbook of Batteries and Fuel Cells'. McGraw-HillNY, 1984
  3. D. P. Davies, P. L. Adcock, M. Turpin, and S. J. Rowen, J. Applied Elesctrochemistry, Vol. 30, 2000, p. 101 https://doi.org/10.1023/A:1003831406406
  4. T. M. Besmann, J. W. Klett, J. J. Henry, Jr., and E. L.Curzio, J. Electrochem. Soc., Vol. 147, 2000, p. 4083-4086 https://doi.org/10.1149/1.1394023
  5. U. S. Jeon, E. A. Cho, H. Y. Ha, S. A. Hong, and I. H. Oh, 'Characterization of Bi-polar Plate Materials for PEM Fuel Cells' , Journal of Power Sources, 2003
  6. A. J. Bard, 'Electrochemical Methods', John Wiley & Sons, 1980, p. 351