초록
철골구조에 있어서 기둥 이음부의 설계는 단순히 적당한 틈에 용접이나 볼트에 의한 이음으로 해석 및 설계가 이루어지고 있는 것이 보편적인 현실이다. 이때 이음부에서 메탈터치에 의하여 상부의 응력을 하부로 전달하는 정도를 규정하는 기준은 각 나라마다 다르다. 미국은 설계자의 판단에 따라 모두 전달 가능하다는 규정아래 설계가 이루어지고 있으며, 우리나라와 일본의 경우는 25%까지 전달 가능하다는 규준에 의해 설계가 이루어지고 있어 그 차이가 너무 크다. 따라서 본 연구에서는 메탈터치에 의한 이음의 응력체계를 규명하여 이음의 합리성을 증진시키고, 이음의 경제성 및 시공성을 위해 틈의 위치 및 이음방법을 매개변수로 하여 메탈터치 실험을 실시하여 미국 및 일본 규준과 비교하였다. 또한 메탈터치 이음부의 거동을 실험적인 방법과 해석적인 방법을 통하여 분석하여 메탈터치 이음부의 설계에 필요한 기초 자료를 제공하고자 한다.
In the steel structure of high-rise buildings, a connection analysisand a column design have been made after welding and bolting suitable gaps. Each country, however, has different codes, and such differences are very big. American steel has been designed according to a code that all axial loads can be carried from the upper parts to the lower parts as determined by the designer, but Korean and Japanese steel have been designed by 1/4 of the standard of all axial loads. In this paper, a metal touch experiment was done as an intermediation parameter with a connecting location and a connecting method for economic and constructive efficiency. Every specimen is tested by a low-to-high displacement control to grasp ultimate strength, displacement, the connection's lateral deflection, and stress. The results of the test were compared and analyzed.