Abstract
This study investigated the inelastic lateral-torsional buckling of simply supported beams under a central concentrated load and a uniformly distributed load. A line-type finite element, method was incorporated with the "so-called" simplified and polynomial patterns of residual stresses. The effect of the load height was also considered in this study. The polynomial residual stresses assumed in this study was a quartic distribution in the flange and a parabolic distribution in the web. The inelastic lateral-torsional buckling of beam was analyzed with four different I-sections manufactured in Korea. Results obtained in this study were compared with KSDM(design method in the 1995 Korean Steel Designers' Manual). The design method in KSDM was found to be generally conservative with and without a sub-beam attached to the main beam, which acted as an intermediate restraint.
우리나라에서는 생산되는 I형강을 대상으로 비탄성 휨-뒤틀림 좌굴에 대하여 연구하였으며 잔류응력은 다항식형과 단순형으로 고려하였다. 또한 웨브의 면의 뒤틀림이 구속된 보의 비탄성 휨-비틀림 좌굴에 대해서도 알아보았다. 해석결과를 강구조편람의 허용 휨응력과 비교하였다. 균일한 휨을 받는 보의 경우는 비탄성 휨-비틀림 좌굴이 중요한 큰 영향을 미치지 않았으나, 중간 브레이싱이 없는 단지간 및 중지간보의 경우 강구조편람에 의한 설계는 과설계가 됨을 알 수 있었다.
