Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

Numerical Analysis of Nonlinear Thermoelastic Stress for Rectangular Thin Plate

사각형 박판의 비선형 열탄성 응력 수치해석

  • Kim Chi-Kyung (Department of Safety Engineering, University of Incheon) ;
  • Kim Sung-Jung (Department of Safety Engineering, University of Incheon)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

A simply supported rectangular thin plate with temperature distribution varying over the thickness is analyzed. Since the thermal deflections are large compared to the plate thickness during bending and membrane stresses are developed md as such a nonlinear stress analysis is necessary. For the geometrically nonlinear, large deflection behavior of the plate, the classical von Karman equations are used. These equations are solved numerically by using the finite difference method. An iterative technique is employed to solve these quasi-linear algebraic equations. The results obtained from the suggested method are presented and discussed.

판의 두께에 선형적으로 변화하는 온도분포의 열하중을 받는 단순지지의 사각형 박판을 해석하였다. 열에 의한 판의 처짐이 판두께에 비해 상대적으로 과대하여 막응력이 부수적으로 발생하여 문제는 비선형 해석이 된다. 큰 처짐을 가지는 기하학적 비선형 문제를 지배하는 기본방정식은 von Karman 방정식이 사용되며 차분법으로 수치해석 한다. 차분화 하여 얻어지는 유사선형 대수방정식은 반복법을 도입하여 해석하고 결과치를 해석적으로 얻은 해와 비교 검토한다.

Keywords

References

  1. Aleck, B.J., 'Thermal Stresses in a RectangularPlate Clamped Along an Edge', Transactions,ASME, Vol. 71, pp. 118. 1949
  2. Alori, Chuji., 'Analysis of Thermal Stresses in Restrained at an Edge', Proceeding, 9th Japanese National Congress for Applied Mechanics, Tokyo, pp. 61. 1959
  3. Copeland, R. E., 'Shrinkage and Temperature Stresses in Masonry', Proceedings, American ConcreteInstitute, Vol. 53, pp. 769. 1957
  4. Kim, C. K., 'Itemtive Analysis of Nonliner Laminated Rectangular Plates by finite Difference Method', Journal of KIIS, Vol. 10, pp. 13-17, 2002
  5. Kobotake, Y., and Inoue, Y., 'Mechanics of Adhesive Joints Part I', Applied Scientific Research, The Hague, Vol. 7, Section A, pp. 53, 1958
  6. lyengar, K. T. Sundara Raja, and ChandrashekharaK., 'Thermal Stresses in Rectangular Plates', Applied Scientific Research, The Hague, Vol. 15, pp. 141, 1965
  7. Szilard, R., 'Theory and Analysis of Plates', Prentce-Hall, Inc., 1974
  8. Timoshenko, S., and Krieger, S. W., 'Theory of Plates and Shells', McGraw-Hill Book Co., Inc.,New York, 1959
  9. Ugural, A. C., 'Stresses in Plates and Shells', McGraw-Hill Book Co., Inc., New York, 1981
  10. Vallabhan, C. V., 'Iterative Analysis of Nonlinear Glass Plates', ASCE, Vol. 109, pp. 489, 1983 https://doi.org/10.1061/(ASCE)0733-9445(1983)109:2(489)
  11. Zienkiewiez, O. C., 'The Computation of Shrinkageand Thermal Stresses in Massive Concrete Structures', Proceeding, Institution of Civil Engineers, London, Vol. 4, pp. 88, 1955 https://doi.org/10.1680/iicep.1955.11317