한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권1호
  • /
  • Pages.71-79
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

STS 316L과 316LN 강의 고온 기계적 특성 및 가공 변질층에 관한 연구

A Study on the Mechanical Properties and Deformed Layer of STS 316L and 316LN Stainless Steels

  • 오선세 (숭실대학교 대학원 기계공학과) ;
  • 이원 (숭실대학교 기계공학과)
  • 발행 : 2004.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The deformed layers generated in face milling works were comparatively investigated to type 316L and nitrogen(N)-added type 316LN stainless steels. In order to characterize mechanical properties between type 316L and type 316LN, high-temperature tensile tests were conducted with different temperatures: R.T to $700^{\circ}C$. The cutting forces of three components, Fx, Fy and Fz were measured using a tool dynamometer through the face milling cutting tests. The deformed layers were measured by micro-hardness tests along deformed layers. The results of mechanical properties showed that type 316LN was superior to type 316L. The deformed layers of two steels were generated in the 1501m-3001m ranges, and type 316L was higher than type 316LN. The reason for this is due to the high strength properties by nitrogen effect. It was found that deformed structures were well observed for type 316L, but were minutely observed for type 316LN in this cutting conditions.

키워드

참고문헌

  1. Kang, E. G., Park, S. J., Lee, S. J., and Kwon, H. D., 'Cutting Force Measuring System Using the Load Cell for a Milling Process,' J. of the KSPE, Vol. 18, No. 6, pp. 133-140, 2001
  2. Hwang, J., Chung, E. S., Lee, K. Y., Shin, S. C. and Namgung. S., 'A Study on the Detection of Cutter Runout Magnitude in Milling,' Proc. of the KSPE, Fall, Annual, Meeting, pp. 151-156, 1997
  3. Park, Y. W., 'Mathematical Modeling for the Depth of Deformed Layer in Machining,' Proc. of the KSPE, Fall, Annual, Meeting, pp. 247-250, 1997
  4. Liu, C. R, and Barash, M. M., 'The Mechanical State of a Surface Generated by Chip Removal Process, Part I :Cutting with a Sharp Tool,' Trans. ASME, Vol. 98, No. 3, pp. 1192-1202, 1976
  5. Matsumoto, Y. and Barash, M.M. and Liu, C. R., 'Effect of Hardness on the Surface Integrity of AISI 4340 Steel,' Trans. ASME, Vol. 108, pp. 169-175, 1986 https://doi.org/10.1115/1.3187060
  6. Trend, E. M., 'Metal Cutting,' Butterwoth and Co., pp. 164-165, 1977
  7. Pickering, F. B., 'Some Benefial Effects of Nitrogen in Steel,' Proc. of High Nitrogen Steels-HNS 88, Lille France, May, pp. 10-31, 1988
  8. ASTM E8M., 'Standard Test Methods for Tension Testing of Metallic Materials,' pp. 77-97, 1995
  9. Hosford, W. F. and Caddell, R. M., 'Metal Forming,' PTR Prentice-Hall, Inc. pp. 61-66, 1993
  10. Kalpakjian, S., 'Manufacturing Processes for Engineering Materials,' 2nd Ed., Addison-Wesley Publishing Company, Inc, pp. 61-66, 1993
  11. Hertzberg, R. H., 'Deformation and Fracture Mechanics of Engineering Materials,' John Wiley & Sons, New York, pp. 16-18, 1976
  12. Elkhabeery, M. M. and Bailey, J. A., 'Surface Integrity in Machining Solution-Treated and Aged 2024-Aluminum Alloy Using Natural and Controlled Contact Length Tools (Part1, Part2),' Trans. ASME, Vol. 106, pp. 152-166, 1984 https://doi.org/10.1115/1.3246628