Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Flow and Heat Transfer Characteristics of a Multi-Tube Inserted Impinging Jet

노즐출구에 삽입된 다중관에 의한 충돌제트의 유동 및 열전달 특성

  • Published : 2004.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental study is conducted to investigate the flow and heat transfer characteristics of a multi-tube inserted impinging jet. Four different multi-tube devices are tested for various nozzle-to-plate distance. Flow visualization by smoke-wire method and velocity measurements using a hot-wire anemometer are applied to analyze the flow characteristics of the multi-tube insert impinging jet. The local heat transfer coefficients of the multi-tube inserted impinging jet on the impingement surface are measured and the results are compared to those of the conventional jet. In multi-tube inserted system the multi-tube length plays an important role in the flow and heat transfer characteristics of the jet flow. With multi-tube insert of I3d4 and I6d4 which has relatively longer tube length than the multi-tube-exit of I3d1 and I6d1, the flow maintains its increased velocity far downstream due to interaction between adjacent flows. For the small H/D of 4, the local heat transfer coefficients of multi-tube inserted impinging jet are much higher than those of the conventional jet because the flow has higher velocity and turbulent intensity by the use of the multi-tube device. At large gap distance of H/D=12, also higher heat transfer rates are obtained by installing multi-tube insert except multi-tube insert of I3d1.

Keywords

References

  1. Gardon, R and Akfirat, J. C., 1965, 'The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets,' Int. J. Heat Mass Transfer, Vol. 8, pp. 1261-1271 https://doi.org/10.1016/0017-9310(65)90054-2
  2. Martin, H., 1977, 'Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces,' Adv. Heat Transfer, Vol. 13, pp. 1-60 https://doi.org/10.1016/S0065-2717(08)70221-1
  3. Jambunathan, K., Lai, E. Moss, M. A. and Button, B. L., 1992, 'A Review of Heat Transfer Data for Single Circular Jet Impingement,' Int. J. Heat and Fluid Flow, Vol. 13, No.2, pp. 106-115 https://doi.org/10.1016/0142-727X(92)90017-4
  4. Viskanta, R., 1993, 'Heat Transfer to Impinging Isothermal Gas and Flame Jets,' Experimental Thermal and Fluid Science, Vol. 6, pp. 111-134 https://doi.org/10.1016/0894-1777(93)90022-B
  5. Yoon, S. H. and Kim, D. K., 1999, 'The Effects of Nozzle Geometry on the Heat Transfer Characteristics of Impinging Jet,' Trans. of KSME (B), Vol. 23, No. 12, pp. 1562-1569
  6. Lee, D. H., Won, S. Y., Lee, Y. M. and Cho, H. N., 2000, 'The Effect of Nozzle Diameter on Heat Transfer to a Fully Developed Round Impinging Jet,' Trans. of KSME (B), Vol. 24, No. 4, pp. 519-525
  7. Cho, H. H. and Kim, Y. S., 1998, 'Characteristics of Heat Transfer in Impinging Jets by Controls of Vortex Pairing,' International Gas Turbine and Aeroengine Congress and Exposition, 98-GT-276
  8. Zaman, K. B. M. and Hussain, A. K. M. F., 1980, 'Vortex Pairing in a Circular Jet Under Controlled Excitation. Part 1. General Jet Response,' J. Fluid Mech., Vol. 101, part 3, pp. 449-491 https://doi.org/10.1017/S0022112080001760
  9. Zaman, K. B. M. and Hussain, A. K. M. F., 1980, 'Vortex Pairing in a Circular Jet Under Controlled Excitation. Part 2. Coherent Structure Dynamics,' J. Fluid Mech., Vol. 101, part 3, pp. 493-544 https://doi.org/10.1017/S0022112080001772
  10. Hwang, S. D., Lee, C. H. and Cho, H. H., 2001, 'Heat Transfer and Flow Structures in Axisymmetric Impinging Jet Controlled by Vortex Pairing,' Int. J. of Heat and Fluid Flow, Vol. 22, pp. 293-300 https://doi.org/10.1016/S0142-727X(01)00091-1
  11. Lee, E. H., Lee, J. S. and Lee, D. H., 2002, 'Heat Transfer Characteristics of a Pulsating Impinging Jet,' Trans. of KSME (B), Vol. 26, No. 7, pp. 903-910
  12. Huang, L. and El-Genk, M. S., 1997, 'Heat Transfer and Flow Visualization Experiments of Swirling, Multi-channel and Conventional Impinging Jets,' Int. J. Heat Mass Transfer, Vol. 41, No.3, pp. 583-600 https://doi.org/10.1016/S0017-9310(97)00123-3
  13. Cho, J. W. and Lee, S. J., 2001, 'Experimental Study on Heat Transfer Characteristics of Swirling Impinging Jet,' Trans. of KSME (B), Vol. 25, No. 10, pp. 1346-1354
  14. Lee, C. H., Kim, Y. S. and Cho, H. H., 1998, 'Heat Transfer Characteristics on Impingement Surface with Control of Axisymmetric Jet(1) - Unifonn Velocity Distribution Jet,' Trans. of KSME (B), Vol. 22, No. 3, pp. 386-398
  15. Hwang, S. D., Lee, C. H. and Cho, H. H., 2000, 'Heat Transfer Characteristics on Impingement Surface with Control of Axisymmetric Jet(2) - with Acoustic Excitation,' Trans. of KSME (B), Vol. 24, No. 3, pp. 373-381
  16. Baughn, J. W., Takahashi, R. K., Hoffman, M. A. and McKillop, A. A., 1985, 'Local Heat Transfer Measurements Using an Electrically Heated Thin Gold-Coated Plastic Sheet,' J. Heat transfer, Vol. 107, pp. 953-959 https://doi.org/10.1115/1.3247527
  17. Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8