Journal of Mechanical Science and Technology

  • 제18권2호
  • /
  • Pages.240-245
  • /
  • 2004
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Flapwise Bending Vibration Analysis of Rotating Composite Cantilever Beams

  • Lee, Seung-Hyun (School of Mechanical Engineering, Hanyang University) ;
  • Shin, Sang-Ha (School of Mechanical Engineering, Hanyang University) ;
  • Yoo, Hong-Hee (School of Mechanical Engineering, Hanyang University)
  • 발행 : 2004.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A modeling method for the modal analysis of a rotating composite cantilever beam is presented in this paper. Linear differential equations of motion are derived using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion. Symmetrical laminated composite beams are considered to obtain the numerical results. The effects of the dimensionless angular velocity, the hub radius and the fiber orientation angle on the variations of modal characteristics are investigated.

키워드

참고문헌

  1. Chandrashekhara, K., Krishnamurthy, K. and Roy, S., 1990, 'Free Vibration of Composite Beams Including Rotray Inertia and Shear Deformation,' Composite Structures, Vol. 14, pp. 269-279 https://doi.org/10.1016/0263-8223(90)90010-C
  2. Kapania, R. and Raciti, S., 1989, 'Nonlinear Vibration of Unsymmetrically Laminated Beams,' AIAA Journal, Vol. 27, No. 2, pp. 201-210 https://doi.org/10.2514/3.10082
  3. Kosmatka, J. and Friedmann, P., 1989, 'Vibration Analysis of Composite Turbo-Propellers Using a Nonlinear Beam-Type Finite Element Approach,' AIAA Journal, Vol. 27, No. 11, pp. 1606-1614 https://doi.org/10.2514/3.10308
  4. Kuo,C. and Lin, S., 1998 'Modal Analysis and Control of a Rotating Euler-Bernoulli Beam Part Ⅰ: Control System Analysis and Controller Design,' Mathematical and Computer Modelling, Vol. 27, No. 5, pp. 75-92 https://doi.org/10.1016/S0895-7177(98)00019-3
  5. Mohamed Nabi S. and Ganesan, N., 1994, 'A Generalized Element for the Free Vibration Analysis Composite Beams,' Computers and Structures, Vol. 51, pp. 607-610 https://doi.org/10.1016/0045-7949(94)90068-X
  6. Putter, S. and Manor, H., 1978, 'Natural Frequencies of Radial Rotating Beams,' J. Sound and Vibration, Vol. 56, pp. 175-185 https://doi.org/10.1016/S0022-460X(78)80013-3
  7. Rand, O., 1991, 'Periodic Response of Thin-Walled Composite Helicopter Rotor Blades,' Journal of the American Helicopter Society, Vol. 36, No. 4, pp. 3-11 https://doi.org/10.4050/JAHS.36.3
  8. Scilhansl, M., 1958, 'Bending Frequency of a Rotating Cantilever Beam,' J. of Appl. Mech. Trans. Am. Soc. Mech. Engrs, Vol. 25, pp. 25-30
  9. Southwell, R. and Gough, F., 1921, 'The Free Transverse Vibration of Airscrew Blades,' British A.R.C. Reports and Memoranda, No. 766
  10. Yoo, H. and Shin, S., 1998, 'Vibration Analysis of Rotating Cantilever Beams,' J. of Sound and Vibration, 212(5), pp. 807-828 https://doi.org/10.1006/jsvi.1997.1469