Journal of Welding and Joining

  • 제22권1호
  • /
  • Pages.50-57
  • /
  • 2004
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지

수치해석과 실험에 의한 SINTAP 용접 구조물 균열 평가법의 검증

Finite Element and Experimental Validation of SINTAP Defect Assessment Procedure for Welded Structure

  • 발행 : 2004.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper provides FE and experimental validation of the defect assessment method for strength mismatched welded structures, resulting from the Brite Euram SINTAP (Structural Integrity Assessment Procedures for European Industry) project. This shows that the proposed method is conservative, and that the degree of conservatism is similar to that embedded in the methods for homogeneous structures. It provides confidence in the use of the proposed SINTAP method for assessing defective weld strength mismatched structures.

키워드

참고문헌

  1. Proceeding European Symposium on Assessment of Power Beam Welds M.Kocak
  2. EPRI Final Report to NP 1931 An engineering approach for elastic-plastic fracture analysis V.Kumar;D.German;C.F.Shih
  3. Ductile Fracture Handbook A.Zahoor
  4. R.H/R6-Revision 4 Assessment of the integrity of structures containing defects, British Energy R6
  5. GKSS/98/E/6 EFAM ETM97: The ETM method for assessing the significance of crack-like defects in engineering structures K.H.Schwalbe;U.Zerbst;Y.J.Kim;W.Brocks;A.Cornec;J.Heerens;;H.Amstutz
  6. GKSS/97/E/9 The ETM method for assessing the significance of crack-like defects in joints with mechanical heterogeneity(strength mis-match) K.H.Schwalbe;Y.J.Kim;S.Hao;A.Cornec.M.Kocak;A. Kocak,M.
  7. Engineering Fracture Mechanics v.68 Simplified J Estimation Based on Engineering Treatment Model for Homogeneous and Mis-Matched Structure Y.J.Kim;K.H.Schwalbe;R.A.Ainsworth https://doi.org/10.1016/S0013-7944(00)00081-3
  8. Appendix 16 in R/H/R6-Revision 4 Allowance of strength mis-match effect R6
  9. Mis-Matching of Welds A new J estimation scheme for cracks in mis-matched welds - the ARAMIS method P.Gilles;C.Franco C.;Schwalbe,K.H.(ed.);Kocak,M.(ed.)
  10. Guide on methods for assessing the acceptability of flaws in fusion welded structures BS 7910
  11. Proceedings of the 12th European Conference on Fracture(ECF 12) Defect Assessment Procedure for Strength Mismatched Structures SINTAP Y.J.Kim;M.Kocak;R.A.Ainsworth
  12. Proceedings of OMAE 98 Driving Force and Failure Assessment Diagram Methods for Defect Assessment R.A.Ainsworth;Y.J.Kim;U.Zerbst;J.Ruiz;F.Gutierrez-Solona
  13. SINTAP report to Task 2.6 British Energy report EPD/GEN/REP/0316/98 no.Issue 2 Stress intensity factor and limit load handbook S.Al Laham
  14. Engineering Fracture Mechanics v.68 Mismatch effect on plastic yield loads in idealised weldments: part I-weld centre cracks Y.J.Kim;K.H.Schwalbe https://doi.org/10.1016/S0013-7944(00)00094-1
  15. Engineering Fracture Mechanics v.68 Compendium of Yield Load Solutions for Strength Mis-matched DE(T). SE(B) and C(T) Specimens Y.J.Kim;K.H.Schwalbe https://doi.org/10.1016/S0013-7944(01)00016-9
  16. ABAQUS User's Manual (version 6.3) ABAQUS
  17. The stress analysis of cracks handbook H.Tada;P.C.Paris;G.Irwin
  18. AEA Technology Report AEAT-0894 Experimental J-integral, crack-tip opening displacement and local CTOD measurements made on strength mis-matched welded specimens G.Wardle;S.Jacques