Effect of Diffuser Shape on the Performance of Water-Chilled Heat Storage

축열조 성능에 미치는 디퓨저 형상의 영향

  • 정재동 (세종대학교 기계공학과/세종ㆍ일진 자동차부품연구소) ;
  • 박주혁 (세종대학교 기계공학과/세종ㆍ일진 자동차부품연구소) ;
  • 조성환 (한국에너지기술연구원)
  • Published : 2004.04.01

Abstract

Diffuser design is crucial for water-chilled heat storage. Its impact on the system performance is more significant for the underground tank due to inherent limit on the aspect ratio and tank shape. The effect of diffuser shape on the performance of the water-chilled heat storage is numerically investigated. Three dimensional simulation has been conducted for fully incorporating the complex diffuser shape and the non-symmetric tank shape. Mixing at the inlet of the diffuser depends on the inlet Reynolds number, Froude number and the diffuser shape. Three types of the diffuser shape and the broad range of Reynolds number (Re=400, 800, 1200) and Froude number (Fr=0.5, 1.0, 2.0) are examined. The performance of the heat storage tank is evaluated by the thermocline thickness which is reverse to the degree of stratification. The radial regulated plate diffuser, which is the suggested diffuser shape in this study, shows the lowest thermocline thickness in the condition considered.

Keywords

References

  1. Proc. of the SAREK '03 Winter Annual Conference Development of present status and prospect of unutilized energy Park,J.T.
  2. Thermal Energy Storage Dincer,I.;Rosen,M.A.
  3. Mag. Soc. Air-Cond. and Refrig. Eng. Korea v.18 no.5 Air-conditioning with chilled-water thermal storage Yoo,J.L.
  4. Proc. of the SAREK '01 Winter Annual Conference effects on stratification due to diffuser shape in a thermal storage tank Lee,S.N.;Lee,Y.S.;Park,S.R.;Yoon,H.K.;Park,J.T.;Chang,K.C.;Ra,H.S.
  5. ASHRAE Transactions: Research v.104 Evolution of temperature distributions in a full-scale stratified chilled-water storage tank with radial diffusers Musser,A.;Bahnfleth,W.P.
  6. ASHRAE Transactions: Research v.107 Parametric stydy of charging inlet diffuser performance in stratified chilled water storage tanks with radial diffusers: Paer 1-Model development and validation Musser,A.;Bahnfleth,W.P.
  7. ASHRAE Transactions: Research v.107 Parametric stydy of charging inlet diffuser performance in stratified chilled water storage tanks with radial diffusers: Paer 2-dimensional analysis, parametric simulations and simplified model development Musser,A.;Bahnfleth,W.P.
  8. Int. J. Heat Mass Transfer v.34 Influence of inlet geometry on mixing in thermocline thermal energy storage Zurigat,Y.H.;Liche,P.R.;Ghajar,A.J. https://doi.org/10.1016/0017-9310(91)90179-I
  9. Int. J. Heat Mass Transfer v.36 Turbulent buoyant flows into a two demensional storage tank Cai,L.;Stewart Jr.W.E.;Sohn,C.W. https://doi.org/10.1016/0017-9310(93)90087-M
  10. Int. J. Heat and Fluid Flow v.19 Laminar flow efficiency of stratified chilled-water storage tanks Homan,K.O.;Soo,S.L. https://doi.org/10.1016/S0142-727X(97)10003-0
  11. Proc. of the SAREK '03 Summer Annual Conference Experimental study on stratification according to diffuser shape in the rectangular thermal storage tank Cho,S.H.;Tae,C.S.;Jang,C.Y.;Lee,C.K.;Yang,S.H.;Kang,H.K.
  12. Korean J. of Air-Conditioning and Refrigeration Engineering v.7 no.1 Analytical solutions to a one-dimensional model for stratified thermal storage tanks Yoo,H.;Pak,E.T.
  13. Korean J. of Air-Conditioning and Refrigeration Engineering v.7 no.2 Theoretical analysis of the charging process with perfectly mixed region in stratified thermal storage tanks Yoo,H.;Pak,E.T.
  14. Korean J. of Air-Conditioning and Refrigeration Engineering v.9 no.1 Analytical approaches to the charging process of stratified thermal storage tanks with variable inlet temperature Yoo,H.
  15. Applied Fluid Dynamics Handbook Blevins,R.
  16. Fluid Research National Bureau of Standards v.43 Interfacial instability and mixing in stratified flows Keulegan,G. https://doi.org/10.6028/jres.043.041