Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Chatter in Plate Milling with a Face Mill

평판의 정면밀링 가공에서 발생하는 채터

  • 이상민 (서울대학교 대학원 기계항공공학부) ;
  • 이영수 (서울대학교 정밀기계설계공동연구) ;
  • 주종남 (서울대학교 기계항공공학부)
  • Published : 2004.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

A cutting force model predicting the dynamic force induced by the axial vibration of it plate in face milling is introduced. When a plate face is milled, deformation in tool axial direction is considerable. Therefore, cutting forces are affected by not only inner-outer modulation in feed direction but also by axial deformation. A PTP (peak-to-peak) diagram made by the simulated dynamic force model is evaluated. The stability of the face milling process such as the chatter outset, and the stable cutting region can be simply estimated. Simulation results are compared with that of experiment.

Keywords

References

  1. Martellotti, M. E., 'An Analysis of the Milling Process,' Trans. ASME, Vol. 63, pp. 677-700, 1941
  2. Fu, H. J., Devor, R. E. and Kapoor, S. G., 'A Mechanistic Model for the Prediction of the Force System in Face Milling Operations,' Trans. ASME, Journal of Engineering for Industry, Vol. 106, pp. 81-88, 1984 https://doi.org/10.1115/1.3185915
  3. Gani, E. A., Kruth, J. P., 'A Geometrical Model of the Cut in Five-Axial Milling Accounting for the Influence of Tool Orientation,' Int. J. Adv. Manuf. Technol., Vol. 13, pp. 677-684 https://doi.org/10.1007/BF01179066
  4. Smith, S., Tlusty, J., 'Efficient Simulation Programs for Chatter in Milling,' Annals of the CIRP, Vol. 42, pp. 463-446, 1993 https://doi.org/10.1016/S0007-8506(07)62486-X
  5. Gygax, P. E., 'Dynamic of Single Tooth Milling,' Annals of CIRP, Vol.28, pp.65-71
  6. Ruzhong, Z., Wang, K. K., 'Modeling of Cutting Force Pulsation on Face Milling,' Annals of CIRP, Vol. 32, pp. 21-26, 1984 https://doi.org/10.1016/S0007-8506(07)63354-X
  7. Kim, H. S., Ehmann, K. F., 'Acutting Force Model for Face Milling Operations,' Int. J. Mach. Tools and Manufact., Vol. 33, No. 5, pp.651-673, 1993 https://doi.org/10.1016/0890-6955(93)90099-G
  8. Altintas, Y., Budak, E., 'Analytical Prediction of Stability Lobes in Milling,' Annals of CIRP, Vol.44, pp. 357-362, 1995 https://doi.org/10.1016/S0007-8506(07)62342-7
  9. Int. J. Mach. Tools and Manufact v.33 no.5 Acutting Force Model for Face Milling Operations Kim,H.S.;Ehmann,K.F. https://doi.org/10.1016/0890-6955(93)90099-G
  10. Annals of CIRP v.44 Analytical Prediction of Stability Lobes in Milling Altintas,Y.;Budak,E. https://doi.org/10.1016/S0007-8506(07)62342-7