DOI QR코드

DOI QR Code

FLOW-3D에 의한 파샬플륨 흐름 해석

Flow Analysis of Parshall Flume Using FLOW-3D

  • 오병동 (한국수자원공사 조사기획처) ;
  • 김경호 (충북대학교 공과대학 토목공학) ;
  • 이환기 (한국수자원공사 기술본) ;
  • 안상도 (한국수자원공사 설계처)
  • 발행 : 2004.05.01

초록

갈수량은 수자원의 개발 및 관리에 매우 중요한 인자중의 하나이다. 신뢰성 높은 갈수량을 측정하기 위해 한국수자원공사는 2000년도에 용담댐 시험유역에 5피트 규격의 파샬플륨을 설치하였다. 파샬플륨은 유량측정을 하기 위해 독특한 모양을 가지고 있으며, 부정확한 유량관측을 유발하는 퇴사문제를 거의 해결한 시설물이다. 본 연구에서는 3차원 CFD (Computational Fluid Dynamics) 모형으로 5가지 수위에 대해서 완전월류(free flow)시 파샬플륨의 유동을 해석하였다. CFD모형에 의해 산정된 결과와 ISO에 제시된 유량공식, USBR에 제시된 유량공식 및 수위-유량관계식으로 산정한 유량을 비교하였다. 그 결과 ISO와 USBR의 공식에 의해 산정된 유량은 거의 동일했으나, 3차원 CFD모형에 의한 유량은 경험공식에 의한 유량보다 9%정도 크게 나타났고 수위-유량관계식에 의한 유량은 경험공식에 의한 유량보다 16%정도 작게 나타났다.

A water shortage is one of the most important factors for development and management of water resources. For reliable water shortage measurement in a stream, Korea Water Resources Corporation(KOWACO) founded five foot Parshall flume at Yong-dam experimental watershed in 2000. The Parshall flume has a specially designed shape to facilitate flow measurements by eliminating sediment deposition problem that could lead to an incorrect measurement. In this study, computational fluid dynamics(CFD) model was used to analyze flow behavior of Parshall Flume under free discharge of five headwater level cases. The flow rates computed by CFD model are compared with those by ISO's formula, USBR's formula and stage-discharge rating curves. Flow rates computed by ISO's and USBR's formula are mostly same, but flow rate by CFD model is larger than empirical value by 9% and flow rate by stage-discharge rating curves is less than empirical value by 16%.

키워드

참고문헌

  1. 노성진 (2001). CFD를 이요한 장방형 침전지내 흐름의 수치모의, 서울대학교, pp. 3-17
  2. 안창진 (2003). 격벽식 분말활성탄 접촉조에 의한 이취미 제거 효율향상. 박사학위 논문, 충북대학교
  3. 이길성, 김남일 (1997). '3차원 흐름해석을 위한 여수로 유입수로의 2차원 흐름해석.' 대한토목학회 학술발표회 논문집(II), pp. 71-74
  4. 한국수자원공사 (2003). 2003년 용담댐 일원 하천유량측정등 수문조사 보고서, pp. 80-104
  5. 한국수자원공사 (2003). 시험유역 운영(용담댐 상류 시험유역)-수자원의 지속적 확보기술개발사업. 2차년도 연구보고서
  6. 한국수자원공사 (2002). 2002년 용담댐 일원 하천유량측정등 수문조사 보고서, pp. 108-109
  7. 한국수자원공사 (1999). 갈수량측정 전용시설(Parshall flume)구축사업 실시설계보고서, pp. 19-30
  8. Flow Science, Inc. (2000). FLOW-3D User's Manuals
  9. Hirt, C.W. and Amsden, A.A. and Cook, J.L. (1974). An Arbitrary Lagrangian-Eulerian Computing Method for all Flow Speeds. J. comp. Phys. 14, 227 https://doi.org/10.1016/0021-9991(74)90051-5
  10. Hirt, C.W. and Nichols, B.D. (1981). Volume of Fluid(VOF) Method for the Dynamics of Free Boundaries. J. comp. Phys. 39. No. 201 https://doi.org/10.1016/0021-9991(81)90145-5
  11. Hirt, C.W. and Williams, K.A. (1994). FLOW-3D Predictions for free discharge and submerged Parshall flumes. USBR
  12. ISO 9826 (1992). Measurement of liquid flow in open channels-Parshall and SANIIRI flumes. pp. 1-10
  13. ISO 8368 (1985). Liquid flow measurement in open channels - Guidelines for the selection of flow gauging structures. pp. 1-5
  14. Kim, N. (2003). Investigation of scale effects of hydraulic model for dam spillway using 3-D CFD model. Ph.D. dissertation, Seoul National University
  15. Nichols, B.D. and Hirt, C.W. (1971). Calculating Three-Dimensional Free Surface Flow in the Vicinity of Suvmerged and Exposed Structures. J. comp. phys. 12, 234
  16. Reck, H. (1988). Submerged Flows in Parshall Flumes, Proceedings, National Conference, Hydraulics Division of the American Society of Civil Engineers, American Society of Civil Engineers, Colorado Springs, Colorado
  17. USBR (1997). Water measurement manual. 3rd edition, pp. 8.40-8.60
  18. USBR (1984). Water measurement manual. Revised reprint, pp. 43-85
  19. Wu, W., Rodi, W. and Wenka, T. (2000). 'Approximate Riemann Solvers in FVM for 2D Hydraulic Shock Wave Modeling'. Journal of hydraulics Engineering, ASCE, Vol.122, No. 12 https://doi.org/10.1061/(ASCE)0733-9429(1996)122:12(692)