한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권6호
  • /
  • Pages.52-59
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

엔드밀 고속 가공시 표면정도 향상을 위한 가공인자의 영향 분석

Analysis of Working Factors for Improvement of Surface Roughness on High Speed End-Milling

  • 배효준 (동아대학교 대학원 기계공학과) ;
  • 박흥식 (동아대학교 기계산업시스템공학부)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently the high speed end-milling processing is demanded the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. The working factors of high speed end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to analyze the working factors to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on distance of cut, feed rate, revolution of spindle and depth of cut. By design of experiment, it is effectively represented shape characteristics of surface roughness in high speed end-milling. And determination($R^2$) coefficient of regression equation had a satisfactory reliability of 76.3% and regression equation of surface roughness is made by regression analysis.

키워드

참고문헌

  1. Nakamura, S., 'High-Speed Spindles for Machine Tools,' Int, J. Japan Soc. Eng., Vol. 30, No. 4, pp. 291-294, 1996
  2. Dewes, R. C., Apinwall, D. K., Wise, M. L. H., 'High Speed Machining Cutting Tools, Machine Requirements,' Proceedings of the 31st Int. MATADOR Conf. Manchester, UK, pp. 455-461, 1995
  3. Elbestawi, M. A., Ismail, F. K. M., Yuen, 'Surface Topography Characterization in Finish Milling,' Int, J. Mach. Tools Manufact, Vol. 34, No. 2, pp. 245-255, 1994 https://doi.org/10.1016/0890-6955(94)90104-X
  4. Lim, P., Jang, D. K., Lee, H. K., Yang, G. E., 'High speed machining of cavity pattern in prehardened mold using the small size tool,' Journal of Korean Society of Precision Engineering, Vol. 21, No. 1, pp. 133-139, 1994
  5. Bechhofer, R. E., Dunnett, C. W., 'Percentage points of multivariate Student distributions,' American Mathematical Society, Vol. 11, 1988
  6. Ullman, N. R., 'The Analysis of Means (ANOM) for Signal and Noise,' Journal of Quality Technology, Vol. 21, pp. 111-127, 1989
  7. Harter, H. L., 'Order Statistics, Their Uses in Testing, Estimation,' U.S. Government Printing Office, Washington, D.C., Vol. 1, 1970
  8. Hayter, A. J., 'A proof of the conjecture that the Tukey-Kramer multiple comparisons procedure is conservative,' Annals of Statistics, Vol. 12, pp. 61-75, 1984 https://doi.org/10.1214/aos/1176346392
  9. Park, S. H., 'Modern Design of Experiment,' Minyung Co. pp. 67-109, 2002
  10. Lee. S. B., 'Easy to Underst, of Taguchi Tehnique,' Sangcho Co., pp. 125-213, 2001
  11. Brown, C. C., 'On a Goodness of Fit Test for the Logistic Model Based on Score Statistics,' Communications in Statistics, Vol. 11, pp. 1087-1105, 1982 https://doi.org/10.1080/03610928208828295
  12. Bhargava, A., 'Missing Observations, the Use of the Durbin-Watson Statistic,' Biometrika 76, Vol. 4, pp. 828-831, 1989 https://doi.org/10.1093/biomet/76.4.828