한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권6호
  • /
  • Pages.69-76
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

선삭에서 절삭유 입자 발생 예측모델

Prediction Model of Aerosol Generation for Cutting Fluid in Turning

  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a prediction model for the aerosol generation of cutting fluid in turning process. Experimental studies have been carried out in order to identify the characteristics of aerosol generation in non-cutting and cutting cases. The indices of aerosol generation was mass concentration comparable to number generation, which is generally used fur environment criterion. Based on the experimental data, empirical model for predicting aerosol mass concentration of cutting fluid could be obtained by a statistical analysis. This relation shows good agreement with experimental data.

키워드

참고문헌

  1. Olson, W. W., 'Environmental conscious manufacturing project contingency planning,' Proceedings of ASME MED-Vol.8, pp. 421-427, 1998
  2. 'Green manufacturing and the global materials industry,' Advanced Materials & Processes, pp. 25-27, 1997
  3. Koelsch, J. R., 'Lubricity vs the environment cascades of cleanliness,' Manufacturing Engineering, pp. 50-58, May 1997
  4. Aronson, R. B., 'Why drying machining,' Maunfacturing Engineering, pp. 33-36, Jan 1995
  5. Yue, Y., Sutherland, J. W., Olson, W. W., 'Cutting fluid mist formation in machining via atomization mechanisms,' ASME Design for Manufacturing and Assembly, DE-Vol. 89, pp. 37-46, 1996
  6. Yue, Y., Gunter, K. L., Michalek, D. J., Sutherland, J. W., 'An examination of cutting fluid mist formation in turning,' Transaction of NAMRI/SME Vol.XXVII, pp. 221-226, 1999
  7. Hwang, J., Chung, E. S., 'optimization of cutting fluids for environmentally conscious machining,' Proceeding of KSPE Spring Annual Meeting, pp. 948-951, 2000
  8. Hwang, J., Chung, E. S., 'A Study on the environmentally conscious machining technology: cutting fluid atomization and environmental impact through spin-off mechanism in turning operation(1),' J. of the KSPE, Vol. 19, No. 3, pp. 73-79, 2002
  9. Ko, T. J., Park, S. H., Kim, H. S., 'Experimental verification of the mist generation mechanism in turning,' Int' Machine Tools & Manufacture, Vol. 43, pp. 115-120, 2003 https://doi.org/10.1016/S0890-6955(02)00188-8
  10. Ko, T. J., Oh, M. S., Park, S. H., Kim, H. S., 'Experimental verification of aerosol generation mechanism for cutting fluid in turning,' J. of the KSPE, Vol. 19, No. 12, pp. 93-99, 2002
  11. Chen, Z., Wong, K., Li, W., Liang, S. Y., Stepenson, D. A., 'Cutting fluid aerosol generation due to spin-off in turning operation : Analysis for environmentally conscious machining,' Journal of Manufacturing Science and Engineering, Vol. 123, pp. 506-512, 2001 https://doi.org/10.1115/1.1367268
  12. Oh, M. S., 'Mist generation model of cutting fuid and its application to health hazard evaluation model in turning,' Ph. D. Thesis, Yeungnam University, 2003