Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

The Numerical Study on Breakup and Vaporization Process of GDI Spray under High-Temperature and High-Pressure Conditions

고온.고압의 분위기 조건에서 GDI 분무의 분열 및 증발과정에 대한 수치적 연구

  • Published : 2004.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to improve the prediction ability of the atomization and vaporization processes of GDI spray under high-pressure and high-temperature conditions. Several models have been introduced and compared. The atomization process was modeled using hybrid breakup model that is composed of Conical Sheet Disintegration (CSD) model and Aerodynamically Progressed TAB(APTAB) model. The vaporization process was modeled using Spalding model, modified Spalding model and Abramzon ＆ Sirignano model. Exciplex fluorescence method was used for comparing the calculated with the experimental results. The experiment and calculation were performed at the ambient pressure of 0.5 MPa and 1.0 MPa and the ambient temperature of 473k. Comparison of caldulated and experimental spray characteristics was carried out and Abramzon ＆ Sirignano model and modified Spalding model had the better prediction ability for vaporization process than Spalding model.

Keywords

References

  1. SAE 961925 Spray Dynamics of High Pressure Fuel Injector for DI Gasoline Engines F.Zhao;J.Yoo;Y.Liu;M.Lai
  2. Transactions of KSAE v.2 no.9 Characteristics of Spray Development from Vapor/Liqiud Phase Distribution for GDI Spray S.C.Hwang;D.S.Choi;D.J.Kim
  3. Transactions of KSAE v.8 no.2 Effect of Ambient Conditions on Spray Behavior of Gasoline Injector C.S.Lee;K.H.Lee;S.C.Choi;S.I.Kwon
  4. SAE 950086 Fuel Jet Models for Multidimensional Diesel Combustion Calculation: An Update C.Beatrice;P.Belardini;C.Bertoli;M.C.Cameretti;N.C.Cirillo
  5. Transactions of KSAE v.10 no.6 Modeling of Spray Atomization of Fuel Injector Using Hybrid Model S.W.Park;H.J.Kim;Y.Rhyu;C.S.Lee
  6. Transactions of KSAE v.12 no.27 Comparison of GDI Spray Prediction by Hybrid Model D.W.Kang;S.C.Hwang;D.J.Kim
  7. SAE 961192 Modeling the Effects of Intake Flow Structures on Fuel/Air Mixing in a Direct Injected Spark-Ignition Engine Z.Han;R.D.Reitz;P.J.Claybaker;C.J.Rutland
  8. ILASS Americas, 15th Annual Conference on Liquid Atomization and Spray System Fuel Spray Modeling of Outward-Opening Pintle Injectors C.O.Iyer;Z.Han
  9. ILASS-Korea v.5 no.2 Aerodynamically Progressed Taylor Analogy Breakup(APTAB) Model for Accurate Prediction of Spray Droplet Deformation and Breakup J.H.Park;S.S.Hwang;Y.B.Yoon
  10. Fourth Symposium (international) on Combusition The Combustion of Liquids Fuel D.B.Spalding
  11. Int. J. Heat Mass Transfer v.32 no.9 Droplet Vaporization Model for Spray Combustion Calculation B.Abramzon;W.A.Sirignano https://doi.org/10.1016/0017-9310(89)90043-4
  12. Los Alamos National Laboratory Report, LA-11560-MS. KIVA-Ⅱ: A Computer Program for Chemically Reactive Flows with Sprays A.A.Amsden;T.D.Butler;P.J.O'Rourke
  13. Master's Thesis, Pusan National University A Study on Hybrid Breakup Models for Modeling of GDI Spray D.W.Kang