Resources Recycling (자원리싸이클링)

The Korean Institute of Resources Recycling (한국자원리싸이클링학회)
권호 표지

The Effect on Mixed Ratio of Recycled Engineering plastic Resin on the Shrinkage in Molded Parts

엔지니어링 플라스틱 재료의 재활용 혼합비가 성형품 수축에 미치는 영향

  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study. an experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed ratio of recycled resin were selected as processing parameters for studying the effect of those conditions on the shrinkage and weight of molded parts. As a result, the shrinkage was increased with the higher mold and melt temperature and it was more sensitive to the change of mold temperature. On the other hand, the weight of molded parts was decreased with the increment of mold and melt temperature.

플라스틱 재료는 재생이 가능한 열가소성 플라스틱과 재생이 거의 불가능한 열경화성 플라스틱으로 분류 할 수 있고, 본 연구에서는 재생이 가능한 열가소성 플라스틱 중 산업 및 생활 전반에 널리 사용되고 있는 PP. PA6, PC 및 PBT 재료의 재생 방안에 대한 기초 연구로서 재생 재료의 혼합비가 증가함에 따라 치수 정밀도에 미치는 영향을 고찰하였다.

Keywords

References

  1. Moy, EH., and Kamal, M:R., 1980: Crystalline and Amorphous Orientation in Injection Molded Polyethylene, Polym. Eng. and Sci., 20(14), pp. 957-964 https://doi.org/10.1002/pen.760201407
  2. Wang, 1983: Computer Aided Design and Fabrication of Molds and Computer Control of Injection Molding, CIMP Progress Report, 10, pp. l30-136
  3. Cox, H.W., and Mentzer, C.C., 1986: The Effect of Fill Time on Properties, Polym. Eng. and Sci., 26, pp. 488-498 https://doi.org/10.1002/pen.760260707
  4. Kumazawa, H., 1994: Prediction of Anisotropic Shrinkage of an Injection Molded Part, SPE Technical Paper, 4, pp. 817-821
  5. Mamat, A., Trochu, F, and Sanschagrin, B., 1994: Shrinkage Analysis of Injection Molded Polypropylene Parts, SPE Technical Paper, 4, pp. 513-517
  6. Brues, J., Kamal, R., and Cooper, G., 1995: Thennolysis of Mixtures of Polyethylene and Polystyrene, Using Virgin Polymers and Recycled Plastic, SPE Technical Paper,S, pp.3720-3125
  7. 홍명웅, 류제구, 1989: 사출성형, 기전연구사, pp. 165-179, 서울
  8. Rubin, 1.1., 1972: Injection Molding Theory and Practice, John&Wiley Sons, pp. 270-281, New York