Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Development of 3D based On-Machine Measurement Operating System

3D 기반의 기상측정 운영시스템 개발

  • Published : 2004.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposed efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software based 3D modeler for inspection on machine and it is interfaced tool machine with RS232C. The software is composed of two inspection modules that one is touch probe operating module and the other is laser displacement sensor operating module. The module for touch probe has need of inspection feature that extracted it from CAD data. Touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of laser displacement sensor is used inspection for profile and very small hole. An Advantage of this inspection method is to be able to execute on-line inspection during machining or after it. The efficiency of proposed system which can predict and definite the machining errors of each process is verified, so the developed system is applied to inspect the mold-base(cavity, core).

Keywords

References

  1. Cho, M. W., Lee, S. H., Seo, T. I., 'On-Machine Measurement of Sculptured Surface Based on CAD/CAM/CAI Integration: I. Measurement Error Modeling,' Journal of the Korean Society of Precision Engineering, Vol.16, No.10, pp. 109-118, 1999
  2. Jeong, S. W, Yoon, G. S., Cho, M. W., 'A study on the Development of a Feature Based Inspection Planning System for On-Machine Measurement process,' KSPE conference, pp. 654-658, 2002
  3. Cho, M. W., Kim, J. S., Seo, T. I., Cho, J. H., 'On-Machine Measurement of Sculptured Surface Based on CAD/CAM/CAI Integration: II. Inspection Planning Strategy,' Journal of the Korean Society of Precision Engineering, Vol.16, No.12, pp. 109-118. 1999
  4. Yoon, G. S., Cho, M. W., Lee, H. H., 'A feature based Computer Aided Inspection Planning system,' KSMTE conference, pp.353-358, 2002
  5. Yoon, G. S., Choi, J. H., Cho, M. W., Lee, H. H., Seo, T. I., 'Development of integrated Rule-based CAPP system for Mold Manufacturing and Inspection,' Journal of the Korean Society of Precision Engineering conference, pp.1235-1238, 2003
  6. Lee, S. W., Park, R. J., Chu, C. N., 'Development of Computer Aided Measurement and Compensation system for Linear Pitch Error Correction in CNC Machine Tools Implementing a New Optimal Correction Algorithm,' Journal of the Korean Society of Precision Engineering, Vol. 15, No. 1, 1998
  7. Chung, S. C., 'CAD/CAM Integration of On-The-Machine Measuring and Inspection System for Free-formed Surfaces,' Proceedings of American Society for Precision Engineering, No.20, pp.267-270, 1999
  8. Yoon, G. S., Kwon, Y. H., Jeong, S. W., Cho, M. W., 'Development of OMM Module for PC-NC system,' Journal of the Korean Society of Precision Engineering, Vol. 20, No. 8, 2003
  9. Shah, J. J., Mantyla, M. and Nau, D. D., 'Advances in Feature - Based Manufacturing,' Amsterdam, Netherlands: Elsevier Science B.V. 1994
  10. Ming, Chang, Paul, P. Lin., 'On-line free form surface measurement via a fuzzy-logic controlled scanning probe,' International Journal of Machine Tools & Manufacture, Vol. 39, pp.537-552, 1999 https://doi.org/10.1016/S0890-6955(98)00052-2
  11. Nam, W. S., Chung, S. C., 'System Synthesis for On-the-Machine Measuring and Inspection of Freeform Surface,' Journal of the Korean Society of Precision Engineering, Vol. 15, No. 12, pp. 81-88, 1998
  12. Song, C. K., Park, J. H., Kim, S. W., 'Automatic Measurement of 3-Dimensional Profile of Free-Formed Surfaces by using Touch-Trigger Probe,' KSME, Vol.17, No.2, pp.1202-1207, 1993
  13. Takeuchi, Y., Shimizu, H., Mukai, I., 'Automatic measurement of 3-dimensional coordinate measuring machine by means of CAD and image data,' Annals of the CIRP, Vol.39, No.1, pp.565-568, 1990 https://doi.org/10.1016/S0007-8506(07)61120-2