Journal of the Korean Society of Food Science and Nutrition (한국식품영양과학회지)

The Korean Society of Food Science and Nutrition (한국식품영양과학회)
권호 표지
DOI QR코드

DOI QR Code

Gas and Lipid Permeabilities and Biodegradability of Poly(3-Hydroxybutyric Acid)/Chitosan Blend Film

Poly(3-Hydroxybutyric Acid)와 Chitosan 블렌드 필름의 기체 투과도, 유지 투과도 및 생분해도

  • 김미라 (경북대학교 식품영양학과)
  • Published : 2004.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The blend films of poly(3-hydroxybutyric acid) (PHB) with chitosan were prepared and water vapor transmission rate, oxygen permeability and lipid permeability of the PHB/chitosan films were measured. Additionally, the biodegradability of the PHB/chitosan films was also evaluated. Water vapor transmission rate and oxygen permeability of the films decreased by the addition of chitosan. The addition of polyethylene glycol (PEG, plasticizer), however, increased the water vapor transmission rate and oxygen permeability of the films. In the evaluation of lipid permeability, all the films except PHB (the film made of only PHB) and PHB-P (the film made of PHB and PEG) did not permeate beef tallow for 24 hours. The consumed oxygen for PHB/chitosan films during incubation was greater than that for the control on the biodegradability determination of the films, which implies that PHB/chitosan films were degraded by the microorganisms. The higher PHB ratio of the films was, the faster biodegradation of the films occurred.

PHB/chitosan 필름의 수분 투과도는 PHB 필름께서 280.25 g/m$^2$ㆍ24 hr로 가장 높았고 chitosan의 함량이 증파할수록 수분 투과도는 낮아지는 경향을 보였다. PEG가 첨가된 PHB/chitosan 필름에서도 PHB-P 필름의 수분 투과도가 294.5 g/m$^2$ㆍ24 hr로 가장 높았고, chitosan의 함량이 증가할수록 수분 투과도는 낮아졌다. 산소 투과도의 경우 PHB 필름이 0.026${\times}$$10^{-10}$$cm^3$(STP) cm/$cm^2$ㆍsecㆍcmHg로 가장 높았으며 chitosan의 첨가 비율이 증가할수록 산소 투과도는 낮아졌다. 또한 가소제인 PEG가 첨가되지 않은 필름이 PEG가 첨가된 필름보다 산소 투과도가 더 낮았다. 유지 투과도에서는 PHB와 PHB-P를 제외한 필름들이 24시간동안 유지론 통과시키지 않아 유지 차단성이 우수한 것으로 나타났다. 필름의 생분해도 측정시 필름을 첨가하지 않은 대조군에 비해 필름이 첨가된 실험군의 산소 소모량이 높아 필름이 생분해되고 있음을 확인할 수 있었으며 필름의 PHB의 비율이 높을수록 분해도가 높은 것으로 나타났다.

Keywords

References

  1. Dieter S, Zuger MF. 1985. On the preparation of methyl and ethyl (R)-(-)-3-hydroxy-valerate by depolymerization of a mixed PHB/PHV biopolymer. Tetrahedron Letters 25: 2747-2750.
  2. Kamaev PP, Aliev I I, Iordanskii AL, Wasserman AM. 2001. Molecular dynamics of the spin probes in dry and wet poly (3-hydroxybutyrate) films with different morphology. Polymer 42: 515-520. https://doi.org/10.1016/S0032-3861(00)00339-6
  3. Avella M, Martuscelli E. 1988. Poly-D(-)-(3-hydroxybutyrate)/poly(ethylene oxide) blends: phase diagram, thermal and crystallization behavior. Polymer 29: 1731-1737. https://doi.org/10.1016/0032-3861(88)90384-9
  4. Greco P, Martuscelli E. 1989. Crystallization and thermal behavior of poly(D(-)-3-hydroxybutyrate)-based blends. Polymer 30: 1475-1483. https://doi.org/10.1016/0032-3861(89)90219-X
  5. Marand H, Collins M. 1990. Crystallization and morphology of poly(vinylidene fluoride)/poly(3-hydroxybutyrate) blends. Polymer Preprints 31: 552-553.
  6. Iriondo P, Iruin JJ, Fernandez-Berridi MJ. 1996. Association equilibria and miscibility prediction in blends of poly (vinylphenol) with poly(hydroxybutyrate) and related homo-and copolymers: An FTIR study. Macromolecules 29: 5605-5610. https://doi.org/10.1021/ma960286l
  7. Gu JK, Kim M. 2002. Mechanical and crystallization properties of the blend films of poly(3-hydroxybutyric acid) with chitosan. Food Engineering Progress 6: 109-116.
  8. Gu JK, Kim M. 2002. Effects of chitosan addition on physical properties and crystallization of poly(3-hydroxybutyric acid) film. J Korean Soc Food Sci Nutr 31: 475-481. https://doi.org/10.3746/jkfn.2002.31.3.475
  9. Arvanitoyannis IS, Nakayama A, Aiba S. 1998. Chitosan and gelatin based edible films: state diagrams, mechanical and permeation properties. Carbohydrates Polymers 37: 371-382. https://doi.org/10.1016/S0144-8617(98)00083-6
  10. Pizzoli M, Scandola M, Ceccorulli G. 1994. Crystallization kinetics and morphology of poly(3-hydroxybutyrate)/cellulose ester blends. Macromolecules 27: 4755-4761. https://doi.org/10.1021/ma00095a016
  11. Iordanskii AL, Kamaev PP, Hanggi UJ. 2000. Modification via preparation for poly(3-hydroxybutyrate) films: watertransport phenomena and sorption. J Appl Polym Sci 76: 475-480. https://doi.org/10.1002/(SICI)1097-4628(20000425)76:4<475::AID-APP4>3.0.CO;2-M
  12. ASTM. 1998. Standard test method for determining gas permeability characteristics of plastic film and sheeting D1434-82. American society for testing materials. USA.
  13. Trezza TA, Vergano PJ. 1994. Grease resistance of corn zein coated paper. J Food Sci 59: 912-916. https://doi.org/10.1111/j.1365-2621.1994.tb08156.x
  14. SAS Institute Inc. 2000. Statistical analysis system. User's guide, version 6.12. SAS Institute Inc., Cary, NC, USA.
  15. Greener IK, Fennema O. 1989. Barrier properties and surface characteristic of edible, bilayer films. J Food Sci 54: 1393-1399. https://doi.org/10.1111/j.1365-2621.1989.tb05120.x
  16. Song TH, Kim CJ. 1996. Preparation of cellulose-based edible film and its physical characteristics. Korean J Food Sci Technol 28: 1-7.
  17. Ayranci E, Tunc S. 2001. The effect of fatty acid content on water vapour and carbon dioxide transmissions of cellulose-based edible films. Food Chemistry 72: 231-236. https://doi.org/10.1016/S0308-8146(00)00227-2
  18. Aydinli M, Tutas M. 2000. Water sorption and water vapour permeability properties of polysaccharide (locust bean gum) based edible films. Lebensmittel-Wissenschaft und Technologie 33: 63-67. https://doi.org/10.1006/fstl.1999.0617
  19. Wiles JL, Vergano PJ, Barron FH, Bunn JM, Testin RF. 2000. Water vapor transmission rates and sorption behavior of chitosan films. J Food Sci 65: 1175-1179. https://doi.org/10.1111/j.1365-2621.2000.tb10261.x
  20. Gontard N, Guilbert S, Cuq JL. 1993. Water and glycerol as plasticizer affect mechanical and water vapor barrier properties of an edible wheat gluten film. J Food Sci 58: 206-211. https://doi.org/10.1111/j.1365-2621.1993.tb03246.x
  21. McHugh TH, Aujard JF, Krochta JM. 1994. Plasticized whey protein edible films: water vapor permeability properties. J Food Sci 59: 416-423. https://doi.org/10.1111/j.1365-2621.1994.tb06980.x
  22. Park HJ, Weller CL, Vergano PJ, Testin RF. 1993. Permeability and mechanical properties of cellulose-based edible films. J Food Sci 58: 1361-1364. https://doi.org/10.1111/j.1365-2621.1993.tb06183.x
  23. Mchugh TH, Avena-Bustillos R, Krochta JM. 1993. Hydrophilic edible films: Modified procedure for water vapor permeability and explanation of thickness effects. J Food Sci 58: 899-903. https://doi.org/10.1111/j.1365-2621.1993.tb09387.x
  24. Banker GS, Gore AY, Swarbrick J. 1966. Water vapor transmission properties of applied polymer films. J Pharm Pharmac 18: 205-211. https://doi.org/10.1111/j.2042-7158.1966.tb07985.x
  25. Park HJ. 1996. Gas and mechanical barrier properties of carrageenan-based biopolymer films. Food Science and Industry 29: 47-53.
  26. Ikejima T, Yoshie N, Inoue Y. 1999. Influence of tacticity and molecular weight of poly(vinyl alcohol) on crystallization and biodegradation of poly(3-hydroxybutyric acid)/ poly(vinyl alcohol) blend films. Polymer Degrad Stabil 66: 263-270. https://doi.org/10.1016/S0141-3910(99)00076-2
  27. Omura Y, Shigemoto M, Akiyama T, Saimoto H, Shigemasa Y, Nakamura I, Tsuchido T. 2003. Antimicrobial activity of chitosan with different degrees of acetylation and molecular weights. Biocontrol Science 8: 25-30. https://doi.org/10.4265/bio.8.25

Cited by

  1. Studies on the Bio-degradability and Characteristics of Mulching Films Containing Rice By-products Applied to Upland Crops vol.57, pp.2, 2012, https://doi.org/10.7740/kjcs.2012.57.2.099
  2. 벼 부산물을 함유한 생분해성 필름의 기계적 성질 및 분해 특성 vol.56, pp.2, 2004, https://doi.org/10.7740/kjcs.2011.56.2.113