한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제12권5호
  • /
  • Pages.187-197
  • /
  • 2004
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

차량용 유압감쇠기 내 기름의 유효 체적탄성계수에 미치는 실린더 벽 탄성의 영향

Effects of Cylinder Shell Elasticity on Effective Bulk Modulus of Oil in Automotive Hydraulic Dampers

  • 이일영 (부경대학교 기계공학부) ;
  • 손단단 (부경대학교 대학원 기계공학부)
  • 발행 : 2004.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the effects of cylinder shell elasticity on effective bulk modulus of oil $K_e$ in automotive hydraulic dampers. A theoretical model of cylinder shell bulk modulus $K_c$ based on the elasticity theory of thick-walled cylinder incorporating not only radial but longitudinal deformation is proposed. In a cylinder, values of $K_c$ by the new model and traditional models are computed and the discrepancies among them are discussed. In a twin-tube type automotive damper, the variation of $K_e$ under different pressure values in chambers of the damper cylinder, based on different theoretical models for $K_c$ is computed. Through these computations, it is shown that remarkable discrepancies in computed values of $K_e$ might occur according to the $K_e$ models in connection with $K_c$ models.

키워드

참고문헌

  1. Journal of Basic Engineering, Trans. of ASME v.86 Precise Measurement and Prediction of Bulk-Modulus Values of Fluids and Lubricants E. E. Klaus;J. A. O'Brien
  2. Journal of Basic Engineering, Transaction of ASME v.86 Isothermal Bulk Modulus of Selected Fluids to $700^{\circ}F$ and 10000 psig V. Hopkins;D. R.Wilson;C. Bolze https://doi.org/10.1243/PIME_PROC_1995_209_211_02
  3. Hydraulic Control Systems H. E. Merritt https://doi.org/10.1080/00423119708969347
  4. Strength of Materials S. Timoshenko
  5. Mechanics of Materials A. Higdon;E. H. Ohlsen;W. B. Stiles;J. A. Weese;W. F. Riley
  6. H. E. Merritt, Hydraulic Control Systems, John Wiley & Sons, Inc., New York, pp.14-18, 1967
  7. S. W. Duym, R. Stiens, G. V. Baron, K. G. Reybrouck, 'Physical Modeling of the Hysteretic Behavior of Automotive Shock Absorbers,' SAE 970101, pp.125-137, 1997
  8. S. Timoshenko, Strength of Materials, D. Van Nostrand Co., New York, pp.236-241, 1953
  9. J. Yu, Z. Chen, Y. Lu, 'The Variation of Oil Effective Bulk Modulus with Pressure in Hydraulic Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol.116, pp. 146-150, 1994 https://doi.org/10.1115/1.2900669
  10. N. D. Manring, 'The Effective Bulk Modulus with a Hydraulic Transmission,' ASME Journal of Dynamic Systems, Measurement, and Control, Vol.119, pp.462-466, 1997 https://doi.org/10.1115/1.2801279
  11. B. H. Cho, H. W. Lee, J S. Oh, "Estimation Technique of Air Content in Automatic Transmission Fluid by Measuring Effective Bulk Modulus," Int. J. Automotive Technology, Vol.3, No.2, pp.57-61, 2002
  12. G. J. Van Wylen, R. E. Sonntag, Fundamentals of Classical Thermodynamics, John Wiley & Sons, Inc., New York, pp.47-53, 1970
  13. E. E. Klaus, J. A. O'Brien, 'Precise Measurement and Prediction of Bulk-Modulus Values of Fluids and Lubricants,' Journal of Basic Engineering, Trans. of ASME, Vol.86, pp.469-474. 1964 https://doi.org/10.1115/1.3688725
  14. V. Hopkins, D. R.Wilson, C. Bolze, 'Isothermal Bulk Modulus of Selected Fluids to 700 $^\circ F$F and 10000 psig,' Journal of Basic Engineering, Transaction of ASME, Vol.86, pp.463-468, 1964
  15. H. E. Merritt, Hydraulic Control Systems, John Wiley & Sons, Inc., New York, pp.14-18, 1967
  16. S. Timoshenko, Strength of Materials, D. Van Nostrand Co., New York, pp.236-241, 1953
  17. A. Higdon, E. H. Ohlsen, W. B. Stiles, J. A. Weese, W. F. Riley, Mechanics of Matehals, John Wiley & Sons, Inc., New York, pp. 167-172, 1986