대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제28권11호
  • /
  • Pages.1629-1636
  • /
  • 2004
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Bloom 연주기의 최적 냉각조건 도출을 위한 응고 시뮬레이션

Solidification Simulation for Optimal Cooling of Bloom Type Continuous Casting Machine

  • 정영진 (POSCO 기술연구소 후판연구그룹) ;
  • 김영모 (RIST 제련공정연구팀) ;
  • 조기현 (RIST 환경·에너지부 에너지연구팀) ;
  • 강충길 (부산대학교 기계공학부, 정밀정형 및 금형가공연구소)
  • 발행 : 2004.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The continuous casting is primarily a heat-extraction process in which the heat transfer at various cooling zones profoundly influences quality of products. So development of numerical model is necessarily needed for more specific and clear investigations upon heat transfer mechanism at mold and secondary cooling zones. In this study, heat transfer coefficients which show the characteristic of heat transfer mechanism in mold are calculated for more exact analysis with temperature measured in bloom mold using optimal algorithm, and finally the validity of cooling conditions at secondary cooling zone actually used at field fur 30 Ton bloom type continuous casting of 0.187%C is investigated. From the results of solidification analysis, the characteristic of bloom mold shows a similar tendency with that of previous studies, and optimized cooling conditions for 0.187%C are presented.

키워드

참고문헌

  1. Samarasekera, I. V., 1979, 'The Thermal Field in Continuous Casting Moulds,' Canadian Metall. Quaterly, Vol. 18, p. 251 https://doi.org/10.1179/cmq.1979.18.3.251
  2. Ray C. Johnson, 1980, 'Optimum Design of Mechanical Elements,' A Wiley-Interscience Publication, pp. 69-85
  3. Garret N. Vanderplaats, 1984, 'Numerical Optimization Techniques for Engineering Design,' McGraw-Hill Book Company, pp. 140-147
  4. David G. Luenberger, 1984, 'Linear and Nonlinear Programming,' ADDISON-WESLEY PUBLISHING COMPANY, pp. 256-279
  5. Son, B. J., Meang, J. S., Won, S. H., Choi, S. K. and Cho, K. H. 1988, 'Design of Maximum Lift Airfoil in Viscous, Compressible Flow,' J. of KSME, Vol. 12, pp. 106-115
  6. Samarasekera, I. V. and Brimacomb, J. K., 1984, 'The Continuous Casting Mould,' Continuous Casting, Vol. 2, pp. 33-44
  7. Saucedo, I., Beech, J. and Davies, G. J., 1982, Metals Technology, July, Vol. 9, pp. 282-290 https://doi.org/10.1179/030716982803285693
  8. 三塚， 1968， '連績スラブの凝固過程にどよぽす 2次スプレ？冷却の影響'，鐵と鋼, Vol. 54, No. 14, p.1457
  9. Private communication with POSCO
  10. 1991, Metal Handbook Desk Edition, American Society for Metals, pp. 1.66-1.67