KIEE International Transaction on Electrical Machinery and Energy Conversion Systems

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Starter/Alternator Systems for HEV and Their Control： A Review

  • Boldea, Ion. (University Politehnica of Timisoara, Romania)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Motor & generator operation at widely variable speeds is needed in various applications but hybrid and electric vehicle (HEV) stand out today, as quite a few companies are launching this year their mass production of HEVs. The quest for better starter-generators is far from ended, though. The present review paper unfolds a comparative critical evaluation of various starter-generators and their control for HEV. Induction, interior PM synchronous, transverse-flux PM synchronous, switched reluctance, together with claw-pole and biaxial excitation PM synchronous (BEGA) configurations with their control are all considered in system evaluations.

Keywords

References

  1. J.M. Miller, V.R. Stefanovic, D. Kak, D. Pelergus, ‘Progresses For Starter – Alternator Systems In Automotive Applications’, Record of EPE – PEMC – 2002, Dubrovnik & Cavtat, Croatia
  2. T. Teratani et al , ‘Development Of Toyota Mild Hybrid System (THM - M) With 42 V Power Net’, Record of IEEE – IEMDC – 2003, Vol 1, pp. 3 – 9
  3. J. Voelker, ‘Top 10 Tech Cars : Here Come The Hybrids’, IEEE Spectrum, March 2004,pp. 20 – 27
  4. I. Husain, ‘Electric And Hybrid Vehicles’, book, CRC Press, Florida, 2003
  5. W. Cawthorne, P. Famouri, N. Clark, ‘Integrated Design Of Linear Alternator/Engine System For HEV Auxiliary Unit’, Record of IEEE – IEMDC – 2001
  6. E.C. Losic, T.M. Lindback, W.M. Arshad, P. Telin, E. Nordlund, ‘ApplicationOf Free – Piston Generator In A Series Hybrid Vehicle’, Record of LDIA – 2003, Birmingan, UK, pp. 541 – 544
  7. E.C. Lovelace, T.M. Jahns , J.L. Kirtley, J.H. Lang, ‘An Interior PM Starter Alternator For Automotive Applications’, Record of ICEM – 1998, Instambul, Vol.3, pp. 1802 – 1808
  8. A. Vaggati, A. Fratta, P. Gagliehni, G. Franchi, F. Villata, ‘Comparison Of A.C. Motor Based Drives For Electric Vehicle Application’, Record of PCIM – 1999, Europe, Vol. IE, pp. 173 – 180
  9. A. Lange, W.R. Canders, F. Laube, N. Mosebach, ‘Comparisons of Different Drive Systems for A 75 KW Electrical Vehicle’, Record of ICEM – 2000, Espoo, Finland
  10. S. Scridon, I. Boldea, I. Tutelea, F. Blaabjerg, ‘BEGA –Biaxial Excitation Generator For Automobiles. Full Characterization And Testing’, Record of IEEE – IAS – 2004 Meeting
  11. S. Chen, B. Lequensne, R.R. Henry, Y. Xuo, J. Ronning, ‘Design And Testing Of Belt – Driven Induction Starter - Generator’, IEEE Trans., Vol. IA – 38, no. 6, 2002, pp. 1525 – 1532
  12. I. Boldea, S.A. Nasar, ‘Induction Machine Handbook’, book, CRC Press, Florida, 2001, pp.130
  13. I. Boldea, S.A. Nasar, ‘Electric Drives’, book, CRC Press, 1999
  14. I. Boldea, ‘Reluctance Synchronous Machine And Drives’, book, Oxford University Press, 1996
  15. I. Boldea, L. Tutelea, C. I. Pitic, ‘Characterization Of PM Assisted Reluctance Synchronous Motor/ Generator (PM-RSM) For a Mild Hybrid Vehicle’, IEEE Trans. Vol. IA-40, no2, 2004, pp.492 – 498
  16. H. Kim, K. K. Huh, H. Harke, J. Wai, R. D. Lorenz, T. Jahns, ‘Initial Rotor Position Estimation For an Integrated Starter-Alternator IPMSM’, Record of EPE-2003, Tolouse, France
  17. M. Schroedl, 'Sensorless Control of ac. Machines at Low Speed And Standstill Based On The INFORM Method', Record of IEEE-IAS, 1996, vol.1, pp. 270-277
  18. A. Consoli, G. Scarcella, A. Fratta, ‘Sensorless Control of PM Synchronous Motors At Zero Speed’, Record of IEEE-IAS-1999, vol. 2, pp.1033-1040
  19. Y. Yeong, R. D. Lorenz, T. M. Jahns, S. K. Sul, ‘Initial Rotor Position Estimation of IPMSM Using Carrier Frequency Injection Methods’, Record of IEEE-IEMDC, 2003, Vol. 2, pp. 1218-1223
  20. A. V. Radun , C. A. Ferreira, E. Richter, ‘Two Channel Switched Reluctance Starter-Generator Results’, IEEE Trans. Vol. IA-34, no 5, 1998, pp. 1026-1034
  21. H. Baush, A. Grief, K. Kanelis, A. Milke, ‘Torque Control Of Battery Supplied Switched Reluctance Drives For Electric Vehicle’, Record of ICEM-1998, Istambul, Vol 1, pp.229-234
  22. R. B. Inderka, R. W. De. Doncker, ‘Simple Average Torque Estimation for Control Of SRMs’, Record of EPE-PEMC, 2000, Kosice, Vol. 5, pp. 176-181
  23. M. S. Islam, M. N. Anwar, I. Hussain, ‘A Sensorless Wide-Speed Range RSM Drive With Optimally Designed Critical Rotor Angles’, Record of IEEEIAS, 2000, Rome
  24. K. M. Rahman, S. E. Schultz, 'High Performance Fully Digital Switched Reluctance Motor Controller For Vehicle Propulsion', IEEE Trans. Vol. IA-38, no 4, 2002, pp. 1062-1071
  25. R. B. Inderka, M., R. De. Doncker, ‘Control Of Switched Reluctance Drives For Electric Vehicle Applications’, IEEE Trans. Vol. IE-49, no 1, 2002, pp. 48-53
  26. M. Eshani, B. Fahimi, ‘Elimination Of Position Sensor In Switched Reluctance Motor Drives: State Of The Art And Future Trends’, IEEE Trans. Vol. IE-49, no 1, 2002, pp. 15-27
  27. T. J. E. Miller, ‘Optimal Design Of Switched Reluctance Motors’, IEEE Trans. Vol. IE-49, no 1, 2002, pp.15-27
  28. H. Weh, M. May, ‘Achievable Force Densities With PM Excited Machines In New Configurations’, Record of ICEM-1986, Munchen, Vol 3, pp. 1107-1011
  29. G. Hennenberger, I. A. Viorel, ‘Variable Reluctance Electrical Machines’, book, Shaker Verlag, Aachen, 2001, chapter 6
  30. A. Njeh, A. Masmoudi, A. El-Antably, ‘3D-FEM based Investigation of Cogging Torque of a Transverse Flux PM Machine’, Record of IEEEIEMDC- 2003, Vol.1, pp. 319-324
  31. J. Luo, S. Huang , S. Chen, T. A. Lipo, ‘Design and Experiments of a Novel Axial Circumpherential Current PM (AFCC0) Machine with Radial Airgap’, Record of IEEE IAS-2001 Annual Meeting
  32. I. Boldea, ‘Automotive Electric Generator Systems – a review’, Record of Electromotion 1999 Symposium, Patras, Greece
  33. W. Lee, M. Sunwoo, ‘Vehicle Electric Power Simulator for Optimizing the Electric Charging System’, International Journal of Automotive Engineering, Vol. 2, no 4, 2001, pp. 157-164
  34. T, Jahns, ‘Component Requirement for Wide Constant Power Operation of IPMSM Drives’, Record of IEEE-IAS, 2000, Rome
  35. W. L. Soong, M. Ertrugrul, ‘Field Weakening Performance of IPMSM’, Record of IEEE-IAS-2000, Rome