The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Characteristics Analysis of Flux-Reversal Machine considering BEMF Current

역기전력 전류를 고려한 자속 역전식 기기의 특성 해석

  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Flux-reversal machine (FRM) is a new brushless doubly salient permanent magnet machine. Its operation is similar to that of the brushless DC motor, so it can be driven by 120 degree square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed. In this driving method, the back electromotive force (BEMF) current in the open phase is generated by the BEMF. It can be appeared or disappeared according to the changes of the neutral voltage of the machine. In this paper, the time-stepped voltage source finite-element method taking BEMF current into account is proposed. Its influences on the performances of the FRM are also investigated. To prove the propriety of the proposed analysis method, a Digital Signal Processor (DSP) installed experimental devices are equipped and the experiment is performed.

Keywords

References

  1. R. P. Deodhar, S. Andersson, I. Boldea, and T. J. E. Miller, 'The flux-reversal machine: a new brushless doubly-salient permanent-magnet machine,' IEEE Ind. Applicat., vol. 33, no. 4, pp. 925-934, July/August 1997 https://doi.org/10.1109/28.605734
  2. C. Wang, S. A. Nasar, and I. Boldea, 'Three-phase flux reversal machine (FRM),' IEE Proceedings Electric Power Applications, vol. 146, no 2, pp. 139-146, March 1999 https://doi.org/10.1049/ip-epa:19990114
  3. C. X. Wang, I. Boldea, and S. A. Nasar, 'Characterization of three phase flux reversal machine as an automotive generator,' IEEE Trans. Energy Conversion, vol. 16, no. 1, March 2001 https://doi.org/10.1109/60.911407
  4. C. X. Wang, S. A. Nasar, and I. Boldea, 'High speed control scheme of flux reversal machine,' International Conference IEMDC 1999, May 1999, pp, 779-781 https://doi.org/10.1109/IEMDC.1999.769240
  5. I. Boldea, J. Zhang, and S. A. Nasar, 'Theoretical characterization of flux reversal machine in low-speed servo drives-the pole-PM configuration,' IEEE Ind. Applicat., vol. 38, no. 6, pp. 1549-1557, November/December 2002 https://doi.org/10.1109/TIA.2002.804759
  6. 여형기, '브러시리스 직류전동기용 센서리스 드라이브 시스템 개발에 관한 연구,' 고려대학교 박사학위논문, 1998
  7. Z. Xiangjun and C. Boshi, 'Influences of PWM mode on the current generated by BEMF of switch-off phase in control system of BLDC motor,' International Conference ICEM 2001, 2001, pp. 579-582 https://doi.org/10.1109/ICEMS.2001.970742
  8. S. Ogasawara and H. Akagi, 'An approach to position sensorless drive for brushless dc motors,' IEEE Ind. Applicat., vol. 27, no. 5, pp. 928-933, September/October 1991 https://doi.org/10.1109/28.90349
  9. 임달호, 전기계의 유한요소법, 동명사, 1992
  10. TMS320F243/F241/C242 DSP Controllers Reference Guide, Texas Instruments, 2000