DOI QR코드

DOI QR Code

3 wt.% Cu 함유 STS 304 빌렛의 열간가공성과 표면결합에 미치는 δ-ferrite의 영향

Effect of δ-Ferrite on the Hot Workability and Surface Defect of STS 304 Billets Containing 3 wt. % Cu

  • 김상원 (포항산업과학연구원 부품신소재연구센터 신금속연구팀)
  • Kim, S.W. (New Materials & Components Research Center, Research Institute of Industrial Science & Technology (RIST))
  • 발행 : 2004.06.01

초록

To investigate the effect of D-ferrite on the hot workability and surface defect of STS 304 billets containing 3 wt. % Cu, microstructure observations and high temperature mechanical properties test were carried out for the specimens extracted mainly from raw or oxidized billets. It was found that the total $\delta$-ferrite content has little influence on the hot workability, even though the fracture cracks due to high temperature tension or compression test were initiated and propagated mostly along $\delta$/${\gamma}$ boundary in the specimens. On the other hand, it was supposed that the direct causes of surface defects in the wire rolled from the as-continuously cast billet were the grain boundary embrittlement arose from the deep diffusion of oxygen into the grain boundary, and the oxidation of $\delta$-ferrite connected by a grain boundary to the surface during the billet reheating process as well.

키워드

참고문헌

  1. J. Y. Choi and W. Jin, J. Kor. Inst. Met. & Mater., 37(1), 27 (1999)
  2. Y. S. Ahn, Y. H. Lee and Y. D. Lee, J. Kor. Inst. Met. & Mater., 30(7), 799 (1992)
  3. G. Jolley and J. E. Geraghty, Solidification & Casting of Metals, The Metal Society, p.411, London (1979)
  4. L. Myllykoski, Act. Univ. Oul., C26, Metallurg., 61 (1983)
  5. J. C. Lippold and W. F. Savage, Welding Res. Supplement, 12, 388s (1982)
  6. J. H. Decroix, A. M. Neveu and R. J. Castro, The Iron and steel Inst. p.135, London (1968)
  7. Y. Uematsu, T. Fujimura and K. Hoshino, Nippon Steel Tech. Rep., 25, 47 (1982)
  8. H. Fredriksson, Metall. Trans., 3A, Nov., 2989 (1972)
  9. Y. Y. Lee and S. K. Kim, J. Kor. Inst. Met. & Mater., 30(9), 1104 (1992)
  10. Y. Y. Lee and S. D. Sim, J. Kor. Inst. Met. & Mater., 34(5), 596 (1996)
  11. C. H. M. Jenkins, J. Iron and Steel Inst., 136, 187 (1973)
  12. R. H. Henke and R. A. Lula, J. Metals, p.883 (1954)

피인용 문헌

  1. General rotational surfaces with pointwise 1-type Gauss map in pseudo-Euclidean space E 2 4 vol.46, pp.1, 2015, https://doi.org/10.1007/s13226-015-0112-0
  2. Classifications of Canal Surfaces with L1-Pointwise 1-Type Gauss Map vol.83, pp.1, 2015, https://doi.org/10.1007/s00032-015-0233-2