DOI QR코드

DOI QR Code

Characterization of Oxide Scales Formed on TiAl-W-Zr Alloys

TiAl-W-Zr 합금에 생성된 고온산화막 분석

  • Woo Sung-Wook (Department of Advanced Materials & Engineering, Sungkyunkwan University) ;
  • Lee Dong-Bok (Department of Advanced Materials & Engineering, Sungkyunkwan University)
  • 우성욱 (성균관 대학교 금속재료공학부) ;
  • 이동복 (성균관 대학교 금속재료공학부)
  • Published : 2004.06.01

Abstract

A Ti47Al1.7W-3.7Zr alloy was oxidized between $900^{\circ}C$ and $1050^{\circ}C$, and the oxide scales formed were studied. The oxide scales consisted primarily of an outer$TiO_2$ layer, an intermediate $Al_2$$O_3$-rich layer, and an inner mixed ($TiO _2$ + $Al_2$$O_3$) layer. Besides $TiO_2$ and $Al_2$$O_3$, oxidation led to the formation of some $Ti_2$AlN and TiN. Both W and Zr were preferentially segregated below the intermediate $Al_2$$O_3$-rich layer. Tungsten in the oxide scale was present as $WO_3$ and ${Ti}_{x}$$W_{1-x}$, whereas zirconium as monoclic-$ZrO_2$ and tetragonal-$ZrO_2$.

Keywords

References

  1. W. M. Yin, V. Lupine and L. Battezzati, Mater. Sci. Eng., A239-240, 713 (1997) https://doi.org/10.1016/S0921-5093(97)00657-6
  2. Y. W. Kim, J. Met., 46(7), 30 (1994)
  3. M. P. Brady, W. J. Brindley, J. L. Smialek and I. E. Locci, J. Met., 48(11), 46 (1996)
  4. A. Tomasi, S. Gialanella, P.G. Orsini and M. Nazmy, MRS Symp. Proc. 364, 999 (1995)
  5. A. Tomasi, C. Noseda, M. Nazmy and S. Gialanella, MRS Symp. Proc. 460, 225 (1997)
  6. A. Tomasi, S. Gialanella, M. Nazmy, W. Riva and M. Staubli, Gamma Titinium Aluminides, p.805, TMS, Warrendale, PA (1999)
  7. Y. Shida and H. Anada, Corros. Sci. 35, 945 (1993) https://doi.org/10.1016/0010-938X(93)90313-6
  8. Y. Shida and H. Anada, J. Jpn Inst. Met. 58, 1036 (1994)
  9. Y. Shida and H. Anada, Mater. Trans. JIM, 35, 623 (1994) https://doi.org/10.2320/matertrans1989.35.623
  10. Y. Shida and H. Anada, Oxid. Met. 45, 197 (1996) https://doi.org/10.1007/BF01046826
  11. D. B. Lee, W. S. Shim and D. Y. Seo, Mater. Sci. Forum, 426/432, 1819 (2003)
  12. S. Taniguchi and T. Shibata, Intermetallics 4, S85 (1998) https://doi.org/10.1016/0966-9795(96)00017-9