Comparison of Wedge Factors of Dynamic Wedge and Physical Wedge

기능상쐐기와 물질쐐기의 쐐기인수의 비교

  • 김재성 (분당서울대학교병원 방사선종양학과) ;
  • 강위생 (서울대학교 의과대학 방사선종양학교실)
  • Published : 2004.12.01

Abstract

Even though the wedge factor was defined by ICRU, RTPS uses other definition different from the wedge factor to consider the wedge effect to correct dose. Because the factors with different concept are defined in a very different way, replacement of different factor could make severe error of dose and is unacceptable because their values are very different from each other. Radiotherapy machine installed in department includes physical wedges and function of dynamic wedge by upper jaws, and Eclipse and Pinnacle$^{3}$ such as RTPS are used. The wedge factors, relative wedge output factors and wedge field output factors of physical wedges and dynamic wedges were measured by an ionization chamber in water phantom. They are analyzed and compared in according to wedge position, field size, wedge angle, X-ray quality, measurement condition. Wedge factor, relative wedge output factors and wedge field output factors of dynamic wedges comparing physical wedges have an effect of several factors. Main factors effecting to the factors of dynamic wedges were field size and wedge angle. Beam quality of X-ray introduces a few effect to the factors. Because the factors related to wedge and defined with different concepts are different from each other, to reduce dose error it should be input by values proper to RTPS.

국제방사선량 및 측정위원회(ICRU)가 쐐기인수를 정의하고 있지만 방사선치료계획장치는 쐐기에 관한 다른 개념을 도입하여 선량을 보정하기도 한다. 개념이 다른 인수들은 아주 다르게 정의되어 있기 때문에 그 값도 용납될 수 없을 정도로 다를 수 있어서 심각한 선량오차가 발생될 수 있다. 설치된 방사선치료기(Cinac 21EX, Varian, 미국)에는 물질쐐기(위와 아래)와 위턱에 의한 쐐기 기능이 있고 방사선치료계획장치(RTPS)로 Eclipse(Varian, 미국)와 Pinnacle$^{3}$(ADAC, 미국)가 사용되고 있다. 물질쐐기와 기능상쐐기의 쐐기인수, 쐐기상대출력인수 및 쐐기출력인수를 물팬톰에서 이온함으로 측정하여 조사면크기와 쐐기위치, 쐐기각, X선 투과력, 측정조건에 따라 분석하고 비교하였다. 기능상쐐기가 물질쐐기에 비해 여러 가지 요인에 크게 영향을 받으며, 기능상쐐기의 쐐기인수 등에 영향을 미치는 주된 요인은 조사면크기와 쐐기각 이었다. X선 투과력도 쐐기인수 등에 약간의 영향을 미쳤다. 쐐기에 관련된 상이한 개념의 인수는 그 값이 6 MV는 63%, 15 MV는 59% 이상 다를 수 있기 때문에 선량오차를 줄이기 위해 방사선치료계획장치에 활용되는 인수를 파악하고 RTPS에 합당한 값을 입력해야 한다.

Keywords