Journal of the Korean Graphic Arts Communication Society (한국인쇄학회지)

The Korean Graphic Arts Communication Society (한국인쇄학회)
권호 표지

Preparation of Nanocomposite by Microwave Processing

마이크로파 공정을 이용한 나노복합체의 제조

  • Kim, Tae-Hoon (Division of Image and Information, College of Engineering, Pukyong National University) ;
  • Son, Se-Mo (Division of Image and Information, College of Engineering, Pukyong National University) ;
  • Park, Ji-Hwan (Division of Applied Chemical Engineering, College of Engineering, Pukyong National University) ;
  • Seo, Geum-Suk (Division of Applied Chemical Engineering, College of Engineering, Pukyong National University) ;
  • Park, Seong-Soo (Division of Applied Chemical Engineering, College of Engineering, Pukyong National University)
  • 김태훈 (부경대학교 공과대학 화상정보공학부) ;
  • 손세모 (부경대학교 공과대학 화상정보공학부) ;
  • 박지환 (부경대학교 공과대학 응용화학공학부) ;
  • 서금석 (부경대학교 공과대학 응용화학공학부) ;
  • 박성수 (부경대학교 공과대학 응용화학공학부)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at $130^{\circ}C$ for 30min with various amount of MMT or OMMT used the melt-intercalation method applied the classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry (XRD), transmitted electron microscopy (TEM) differential scanning calorimetry (DSC), and rheometric dynamic analysis (RDA). It was found that intercalated or exfoliated state of the samples could be controlled by the clay type, clay content, and heating type.

Keywords