Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Energy-Based Hysteretic Models for R/C Members

에너지 소산능력에 기초한 철근콘크리트 부재의 이력모델

  • 엄태성 (서울대학교 공과대학 건축학과 건축구조시스템 연구실) ;
  • 박홍근 (서울대학교 공과대학 건축학과)
  • Published : 2004.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Since existing hysteretic models for R/C members focused on presenting the degrading stiffness using empirical equations based on experiments, they cannot accurately predict the energy dissipation capacity during cyclic loading. Recently, design equations which can evaluate the energy dissipation capacity of R/C members were developed. Based on those equations, in the present study, an energy-based hysteretic model for flexure-dominated R/C members was developed. The proposed model was devised to dissipate the same energy as the actual one dissipated during a complete load cycle. The proposed model represents the hysteretic behaviors of R/C members accompanied by stiffness degradation and pinching using primary and cyclic curves and six unloading/reloading rules. The proposed model was verified by comparisons with various experimental results. The energy-based hysteretic model can be used to develop computer programs for static and dynamic analysis/design because it is simple and easily applicable to numerical analysis.

기존의 철근콘크리트 부재의 이력모델은 실험에 기초한 경험식을 사용하여 주기거동시 나타나는 강성저하를 나타내는데 중점을 두므로, 에너지소산능력을 정확히 예측할 수 없다. 최근 다양한 설계변수의 영향을 고려하여 주기거동 동안 소산하는 에너지를 정확히 계산할 수 있는 설계식이 개발되었다. 본 연구에서는 이러한 설계식에 기초하여 휨지배 부재에 대한 에너지기초이력모델(Energy-Based Hysteretic Model)을 개발하였다. 제안된 모델은 완전한 주기거동을 할 경우 실제거동과 동일한 에너지를 소산하도록 고안된 선형모델로, 주곡선(Primary Curve)과 주기곡선(Cyclic Curve)을 근간으로 하고 다섯 가지 제하/재하 규칙을 적용하여 핀칭 및 강성저하를 수반하는 주기거동을 나타낸다. 본 연구에서는 다양한 실험과의 비교를 통하여 제안된 이력모델의 정확성과 유효성을 검증하였다. 제안된 이력모델은 간단하면서도 수치해석의 적용에 용이하므로, 정적 및 동적 비선형 해석/설계 프로그램의 개발에 사용할 수 있다.

Keywords

References

  1. ATC, 'Seismic evaluation and retrofit of concrete buildings', ATC-40, Applied Technology Council, Redwood City, California, 1996
  2. Building Seismic Safety Council, 'NEHRP guidelines for the seismic rehabilitation of buildings', FEMA-273, Federal Emergency Management Council, Washington, D.C, 1997
  3. 박효경, 김선필, '반복하중을 받는 RC기둥의 비선형해석을 위한 모켄트-곡률 관계의 개발', 대한토목학회 논문집, 대한토목학회, Vol. 21, No. 6-A, 2001, pp. 957-966
  4. Clough, R. W. and Johnston, S. B., 'Effect of Stiffness Degradation on Earthquake Ductility Requirements,' Proceedings, Japan Earthquake Engineering Symposium, Tokyo, Japan, 1966. 10, pp. 195-198
  5. Kunnath, S. K., Reinhorn, A. M., and Park, Y. J., 'Analytical Modeling of Inelastic Seismic Response of RIC Structures,' Journal of Structural Engineering, ASCE, Vol. 116, No.4, 1990, pp. 996-1017 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(996)
  6. Kwak, H. and Kim, S., 'Nonlinear analysis of RC Beams Subject to Cyclic Loading,' Journal of Structural Engineering, ASCE, Vol. 127, No. 12, 2001, pp. 1436-1444 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1436)
  7. Roufaiel, M. S. L. and Meyer, c., 'Analytical Modeling of Hysteretic Behavior of R/C Frames,' Journal of Structural Engineering, ASCE, Vol. 113, No.3, 1987, pp. 429-444
  8. Saiidi, M., 'Hysteresis Models for Reinforced Concrete,' Journal of the Structural Division, ASCE, Vol. 108, No. ST5, 1982, pp. 1077-1087
  9. Takeda, T., Sozen, M. A., and Nielsen, N. N., 'Reinforced Concrete Response to Simulated Earthquakes,' Journal of the Structural Division, ASCE, Vol. 96, No. ST12, 1970, pp. 2557-2572
  10. Park, R, Kent, D. C., and Sampson, R. A.,'Reinforced Concrete Members with Cyclic Loading,' Journal of the Structural Division, ASCE, Vol. 98, No. ST7, 1972, pp. 1341-1359
  11. Park, R and Paulay, T., Reinforced Concrete Structures, John Wiley & Sons, New York, 1972
  12. 박홍근, 엄태성, '휨지배 철근콘크리트 부재의 핀칭과 에너지소산능력,' 한국콘크리트학회 논문집, Vol. 15, No. 4, 2003, pp. 594-605
  13. 엄태성, 박홍근, '휨지배 철근콘크리트 부재의 에너지 소산성능 평가방법,' 한국콘크리트학회 논문집, Vol. 14, no. 4, 2002, pp. 566-577
  14. 엄태성, 박홍근, '철근콘크리트 휨재에 대한 에너지 소산능력 산정식의 개발,' 한국콘크리트학회 논문집, Vol. 14, no. 6, 2002, pp. 989-1000 https://doi.org/10.4334/JKCI.2002.14.6.989
  15. 한상환, 이리형, '철근콘크리트 보통모멘트 골조 기둥의 거동평가,' 한국콘크리트학회 논문집, Vol. 14, no.2, 2002, pp. 199-206
  16. Abrams, D. P., 'Influence of Axial Force Variations on Flexural Behavior of Reinforced Concrete Columns,' ACI Structural Journal, Vol.84, No.3, 1987, pp. 246-254
  17. Brown, R. H. and Jirsa, J. O., 'Reinforced Concrete Beams under Load Reversals,' ACI Structural Journal, Vol.68, No.5, 1971, pp. 380-390
  18. Cheok, G. S. and Stone, W. C., 'Behavior of 1/6-Scale Model Bridge Columns Subjected to Inelastic Cyclic Loading,' ACI Structural Journal, Vol.87, No.6, 1990, pp. 630-638
  19. Park, R and Thompson, K. J., 'Behavior of Prestressed, Partially Prestressed and Reinforced Concrete Interior Beam-Column Assemblies under Cyclic Loading: Test Results of Unit 1 to 7,' Research Report 74-9, Department of Civil Engineering, University of Canterbury, 1974, pp. 42
  20. Wehbe, N. I., Saiidi, M. S., and Sanders, D. H., 'Seismic Performance of Rectangular Bridge Columns with Moderate Confinement,' ACI Structural Journal, Vol.96, No.2, 1999, pp. 248-258
  21. Wight, J. K. and Sozen, M. A., 'Strength Decay of RC Columns under Shear Reversals,' Journal of the Structural Division, ASCE, Vol. 101, No. ST5, 1975, pp. 1053-1065
  22. 임혜정, 박흥근, 엄태성, '내진 설계를 위한 에너지 소산량 산정법의 활용,' 한국지진공학회 논문집, Vol. 7, No. 6, 2003, pp. 109-117 https://doi.org/10.5000/EESK.2003.7.6.109
  23. V. Prakash, G. H. Powell, and S. Campbell, 'DRAIN-2DX Base Program Description and User Guide-Version 1.10,' University of California, Report No. UCB/SEMM-93/17, November, 1993
  24. Paulay, T. and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, INC, 1992
  25. Priestley, M. J. N, 'Performance Based Seismic Design,' Proceedings, $12^{th}$ WCEE, Auckland, New Zealand, 2000