Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Zn and Mn on the Synthesis of Zn2SiO4:Mn2+ Phosphor by SHS

자전연소 합성법을 이용한 Zn2SiO4:Mn2+ 형광체 합성시 Zn 및 Mn의 영향

  • Lee Jong Eun (Engineering Research Center for Rapidly Solidified Materials, Chungnam National University) ;
  • Kim Byeong Beom (Engineering Research Center for Rapidly Solidified Materials, Chungnam National University) ;
  • Lee Hyeok Hui (Korea Research Institute of Chemical Technology) ;
  • Won Chang Whan (Engineering Research Center for Rapidly Solidified Materials, Chungnam National University)
  • 이종은 (충남대학교 급속응고 신소재 연구소) ;
  • 김병범 (충남대학교 급속응고 신소재 연구소) ;
  • 이혁희 (한국화학연구원) ;
  • 원창환 (충남대학교 급속응고 신소재 연구소)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The synthesis of $Zn_{2}SiO_4:Mn^{2+}$ for PDP green phosphor by SHS(Self-propagating High temperature Synthesis method) was studied. The precursors were well mixed and cold compacted. And then, the green pellet was synthesized at high temperature through self-propagating high temperature zone. Because this reaction uses the heat resulted from the oxidation of Zn metal powder in this system, Zn/ZnO mole ratio is one of the most important reaction variable. Throughout several experiments, the optimal condition of Zn/ZnO mole ratio and Mn concentration are 1.2/0.8 and 0.05mo1e, respectively.

Keywords

References

  1. C. R. Ronda, J. Lumin., 72(1), 49 (1997) https://doi.org/10.1016/S0022-2313(96)00374-2
  2. M. Ishimoto, N. Iwase, S. Tadaki, S. Fukuta and K. Betsui, Extended Abstract Book of 5th Int. Conf. Sci. &Tech Display Phosphors, 361 (1999)
  3. R. Morimo and K. Matae, Mater. Res. Bull., 24(2), 175 (1989) https://doi.org/10.1016/0025-5408(89)90122-0
  4. A. P. Hardt and P. V. Phung, Combution and Flame, 21 (1973)
  5. J. Kiser and R. M. Spriggs, 'Soviet SHS Technology : A potential U. S. Advatage in Ceramics', Ceramic Bull., 68(6), 1165 (1989) https://doi.org/10.1016/S0142-9612(01)00233-2
  6. H. B. Wen, J. G. C. Wolke, J. R. de Wijn, Q. Liu and F.Z. Cui, Biomaterials, 18, 1471 (1997) https://doi.org/10.1016/S0142-9612(97)82297-1
  7. H. B. Wen, Q. Liu, J. R. de Wijn, K. DE Groot, J. Matsci. matehals in medicine, 9, 121 (1998) https://doi.org/10.1023/A:1008859417664
  8. D. H. Shin, I. Kim, J. Kim, Y. S. Kim and S. L. SemiatinActa Materials 51, 983 (2003)
  9. V. V. Stolyarov, Y. T. Zhu, I. V. Alexandrov, T. C. Loweand R. Z. Valiev, Materials Science and Engineering,A299, 59 (2001)
  10. Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon,Acta Mater. 46, 3317 (1998) https://doi.org/10.1016/S1359-6454(97)00494-1
  11. H. M. Kim, F. Miyaji, T. Kokubo, S. Nishiguchi and T.Nakamura, John Wiley & Sons, Inc, 100 (1999)